Description
The Lee Factory Crimp Die for .223 Remington is a single rifle crimp die that gives your handloads that firm, consistent crimp you see on factory ammo. Instead of rolling the case mouth down from the top, it uses a collet that closes in from the sides, squeezing the case into the bullet at a right angle. That sideways action is what makes it so forgiving, since it won't buckle or bulge the case the way a roll crimp can if your trim lengths aren't all identical.
This is the real draw for folks loading .223 and 5.56 NATO for an AR or any semi-auto. A good crimp keeps bullets from walking under recoil and magazine pressure, and it helps build more uniform start pressure, which tends to tighten up groups and cut down on velocity swings shot to shot. Reloaders who run these report cleaner, more consistent rounds and easier chambering across the board.
Why the Lee .223 Factory Crimp Die Earns Bench Space
Setup is about as straightforward as dies get. You thread it in, run a loaded round up, and turn the adjustment screw to dial in exactly how much crimp you want. Back it off for a light touch or crank it down for a heavier hold, then lock the ring and you're off. Because the collet forms its own crimp, you don't need bullets with a factory cannelure or crimp groove, which opens up a lot more projectile options for your .223 loads.
Running the Lee Factory Crimp Die for .223 and 5.56
This is a standalone crimp die, so it works as a final step alongside whatever sizing and seating dies you already own. It threads into any standard single-stage or progressive press and does not include a shell holder, so grab the correct one for the .223 case head if you don't have it. Built from steel and packed in Lee's plastic storage case, it's a simple, no-nonsense tool that handles jacketed bullets with ease and holds up to regular use at the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90817
- UPC: 734307908171
- Caliber: .223 Rem / 5.56 NATO
- Product Type: Factory Crimp Rifle Die
- Crimp Style: Collet (segmented factory-style crimp)
- Dies In Set: 1
- Material: Steel
- Length: 4.9 in
- Packaging: Plastic storage case
What’s Included
- Lee Factory Crimp Die (.223 Remington)
- Plastic storage case
- Instruction sheet
Frequently Asked Questions
Does the Lee Factory Crimp Die .223 come with a shell holder?
No, this is a single crimp die and does not include a shell holder. You'll need the correct shell holder for the .223 Remington case head, which many reloaders already have from their sizing dies. If you're starting fresh, pick one up to go with it.
Do my bullets need a cannelure or crimp groove to use this die?
Not at all. The collet in the Lee Factory Crimp Die is strong enough to form its own crimp, so bullets without a cannelure or crimp groove work just fine. That makes it a solid pick for a wider range of .223 projectiles.
Will this work for 5.56 NATO loads for my AR?
Yes. The .223 Remington and 5.56 NATO share the same case dimensions, so this die crimps both. A firm crimp is especially helpful for semi-auto rifles since it keeps bullets from moving under recoil and magazine cycling.
Does it replace my seating die?
No, this is a dedicated crimp die used as a separate final step after seating. It threads into any standard press and works alongside your existing sizing and seating dies to put a clean, uniform crimp on finished rounds.



Reviews
There are no reviews yet.