0
0

Lee Precision Taper Crimp Die 90786 – .45 Colt / .454 Casull

UPC: 734307907860

$10.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Crimp is one of those steps that separates sloppy handloads from ammo you can trust, and the Lee Precision 90786 is built to handle exactly that for your .45 Colt and .454 Casull brass. It's a single taper crimp die machined from hardened steel, designed to overcome crimp problems caused by poorly designed dies and leave you with a consistent, repeatable case mouth every time you run a round through it.

What makes a taper crimp worth your time is the gentle angle. Cases naturally vary a bit in length and thickness, and that variation shows up in your crimp. The slow taper on this die stays relatively unaffected by those small differences, so you get uniform results across a full session of brass. The mouth comes out sized so rounds slide into the chamber without fuss, which is a real help with revolvers that run tight cylinders.

Where the Lee 90786 Earns Its Keep

Running finished cartridges through a dedicated crimp die is a smart way to wrap up a reloading session instead of leaning on your seating die to do double duty. Separating the seat and crimp steps gives you cleaner control over both. Keep in mind that jacketed bullets need a crimp groove, or cannelure, for the crimp to grab properly. If you're loading cast or plated with a groove, you're in good shape.

Setup and Fit for the Taper Crimp Die

The 90786 uses the standard 7/8"-14 thread, so it threads into any common single stage, turret, or progressive press without adapters. It handles both .45 Colt and .454 Casull, which is handy if you shoot both out of a Casull-chambered revolver. One note worth sharing: if your existing Lee die set was made in 1986 or later, the crimp angle is already a modified taper, so this die offers little additional advantage in that case. For older sets, mixed-brand setups, or anyone who wants a dedicated crimp station, it's a solid, no-nonsense addition to the bench.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 90786
  • Model Number: 90786
  • UPC: 734307907860
  • Caliber: .45 Colt (Long Colt) / .454 Casull
  • Die Type: Taper Crimp Die
  • Crimp Style: Taper
  • Material: Hardened Steel
  • Thread Size: 7/8"-14
  • Number of Dies: 1
  • Shellholder Included: No
  • Storage Case Included: Yes
  • Length: 4.85 in
  • Shipping Weight: 0.43 lb
  • Country of Origin: United States

What’s Included

  • Lee Precision 90786 Taper Crimp Die (1 die)
  • Plastic storage case

Frequently Asked Questions

What calibers does the Lee 90786 taper crimp die work with?

It's set up for both .45 Colt (Long Colt) and .454 Casull. That makes it a convenient pick if you run a .454 Casull revolver, since those chambers handle .45 Colt as well. One die covers both cartridges.

Will the Lee taper crimp die fit my press?

Yes, it uses the industry standard 7/8"-14 thread, so it threads into any common single stage, turret, or progressive press without adapters. No shellholder is included, so you'll want the correct one for your cartridge. Setup is quick and straightforward.

Do my bullets need a crimp groove to use this die?

Jacketed bullets need a crimp groove, also called a cannelure, for the crimp to seat properly. Cast and plated bullets with a groove work fine as well. If you're loading smooth-sided jacketed bullets without a groove, a taper crimp isn't the right match for them.

Is this die worth it if I already have a newer Lee die set?

If your Lee die set was made in 1986 or later, the crimp angle in those dies is already a modified taper crimp, so this die adds little extra benefit in that situation. It shines with older die sets, mixed-brand setups, or when you simply want a dedicated crimp station separate from your seating die. Plenty of reloaders like running a standalone crimp step as the final move in a session.

Additional information

UPC

734307907860

Manufacturer

Manufacturer Part Number

90786

Caliber/Gauge

45 Colt/454 Casull

Length

4.8500

Product Type

TAPER CRIMP DIE

Shipping Weight

0.4313

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Taper Crimp Die 90786 – .45 Colt / .454 Casull”