Description
A good taper crimp can be the difference between a round that feeds like butter and one that hangs up at the ramp. The Lee Precision Taper Crimp Die for .45 ACP handles that job on its own, removing just enough case mouth flare to seat the bullet snug without biting into it. That matters on a rimless cartridge like the .45 ACP, which headspaces off the case mouth, so you want a straight taper rather than a roll crimp that could throw off your headspacing.
What the .45 ACP Taper Crimp Die Brings to the Bench
Machined from hardened steel, this die is built to last through a serious volume of loading. It covers a handful of .45-class cartridges beyond straight ACP, including .45 Auto Rim, .45 Schofield, .455 Webley, and .45 Winchester Magnum, so one die earns its keep across more than one project. The die uses the standard 7/8-14 thread, so it threads right into any standard single-stage or progressive press. Keep in mind that jacketed bullets should have a crimp groove, or cannelure, to get the best bite from a taper crimp.
Why Add a Standalone Taper Crimp Die
Separating the crimp from the seating step gives you more control over each. You dial in bullet depth with your seater, then set the crimp independently, which is a real help when you're running mixed headstamp brass that varies slightly in length. Loaders who want cleaner, more uniform ammo tend to appreciate a dedicated crimp station, and it's an easy upgrade if you're running a Lee three-die pistol set and want a true fourth station.
A Note on Compatibility
Lee is upfront about one thing: this die offers little or no advantage with Lee dies made in 1986 or newer, since the seating die on those sets already uses a modified taper crimp. If you're running older Lee dies, another brand's set, or you just prefer crimping as its own operation, that's where this die shines.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90785
- UPC: 734307907853
- Caliber: .45 ACP (also .45 Auto Rim, .45 Schofield, .455 Webley, .45 Win Mag)
- Product Type: Taper Crimp Pistol Die
- Die Type: Taper Crimp
- Material: Hardened Steel
- Thread Size: 7/8-14
- Number of Dies: 1
- Gun Type: Handgun
- Length: 4.75 in
- Shipping Weight: 0.4313 lb
What’s Included
- Lee Taper Crimp Die .45 ACP (90785)
- Plastic storage case
Frequently Asked Questions
Do I need the Lee Taper Crimp Die if I already have a Lee .45 ACP die set?
If your Lee dies were made in 1986 or newer, the seating die already applies a modified taper crimp, so this standalone die offers little added benefit in that setup. It makes the most sense with older Lee dies, dies from another brand, or when you simply want to separate the crimp into its own dedicated station. Separating the steps gives you more control and helps with mixed brass that varies in length.
What cartridges does this die work with besides .45 ACP?
Along with .45 ACP, it covers .45 Auto Rim, .45 Schofield, .455 Webley, and .45 Winchester Magnum. That makes it a handy single die if you load across more than one .45-class cartridge.
Does the Lee Taper Crimp Die fit a standard press?
Yes. It uses the common 7/8-14 thread, so it threads into any standard single-stage or progressive reloading press. No special adapters are needed.
Why use a taper crimp instead of a roll crimp on .45 ACP?
The .45 ACP is a rimless cartridge that headspaces off the case mouth, so a taper crimp keeps that mouth square for proper headspacing. A roll crimp can interfere with that and cause feeding or chambering issues. The taper crimp removes the case flare for a snug fit and smooth, reliable feeding.




Reviews
There are no reviews yet.