Description
Finding quality tooling for an old-school revolver cartridge like the .455 Webley Mark II isn't always easy, which is what makes this Lee Precision set worth grabbing. It's a dedicated three-die set built specifically for the .455 Webley, giving owners of these classic Webley and Smith & Wesson revolvers a reliable way to feed them without hunting down scarce factory ammo. Everything you need to size, charge, and seat is in the box, and the carbide construction means your brass goes in clean and comes out clean.
What the .455 Webley MK II Die Set Does
The star of the set is the carbide full-length sizing die. It uses a solid carbide insert ground to a special contour, which resizes the case without leaving the objectionable belt mark you sometimes see from ordinary carbide dies. Because that carbide ring does the work, there's no need to lube your cases before sizing, which cuts out one of the messier steps in the process. The powder through expanding die charges the case while it flares the mouth, and the bullet seating die removes all that flare as it seats, so a separate taper crimp die isn't part of the routine.
Getting the Most From the Lee 90764 Set
These dies run best with consistent brass, ideally cases fired in your own revolver. Since seating and crimping happen in one motion on the seating die, take a little extra care dialing it in the first time, and you'll get clean, uniform rounds after that. The dies use standard 7/8-14 threads, so they'll thread right into any common single-stage or turret press.
Lee has a long reputation for turning out dependable carbide dies at a price that keeps reloading accessible, and this set is a straightforward example of that. For anyone keeping a vintage .455 Webley in the rotation, it takes the guesswork out of rolling your own.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90764
- UPC: 734307907648
- Caliber: .455 Webley Mark II
- Set Type: Carbide 3-Die Set
- Number of Dies: 3
- Die Functions: Full-length sizing, powder through expanding, bullet seating
- Sizing Die: Carbide, no case lube required
- Thread Size: 7/8-14
- Shell Holder: Included (universal)
- Country of Origin: United States
- Shipping Weight: 1.1688 lbs
What’s Included
- Carbide full-length sizing die
- Powder through expanding die
- Bullet seating die
- Universal shell holder
- Powder dipper
- Instructions and load data
- Storage box
Frequently Asked Questions
Do I need to lube my cases with the Lee Carbide .455 Webley die set?
No, that's one of the main perks of the carbide sizing die. The solid carbide insert sizes the brass without needing a coat of case lube first, which saves you a step and keeps your bench cleaner. If you ever run a non-carbide die later, that one would need lube, but this sizer does not.
Does this set include a factory crimp die?
It does not. The set includes the carbide sizing die, powder through expanding die, and bullet seating die. The seating die applies the crimp as it seats the bullet, so a separate crimp step isn't built into this three-die set. If you prefer a standalone factory crimp die, Lee sells those separately.
Will these dies fit my press?
Yes, as long as your press takes standard dies. The Lee 90764 set uses 7/8-14 threads, which is the common standard for single-stage and turret presses. A universal shell holder is included in the box to get you going.
What revolvers is the .455 Webley Mark II die set good for?
It's made for loading the .455 Webley Mark II cartridge, which feeds the classic British Webley service revolvers. Reloaders have also used it successfully for related .455 chamberings like the .455 Colt in Smith & Wesson Hand Ejector revolvers. Running brass fired in your own gun gives the most consistent results.





Reviews
There are no reviews yet.