Description
Finding reloading gear for the 6.5x50mm Japanese Arisaka is half the battle, and that's exactly why this Lee Pacesetter set exists. Part of Lee's Limited Production line, these dies are made in smaller batches throughout the year to cover the old military calibers that most companies have stopped supporting. If you've got a surplus Arisaka Type 38 or 44 sitting in the safe and factory ammo is nowhere to be found, this is how you keep it fed.
What the Lee Pacesetter 2-Die Set Covers
The set includes a full-length sizing die and a bullet seating die, both cut for the 6.5 Japanese cartridge. The full-length sizer resizes the whole case back to spec and knocks out the spent primer in one stroke, while the seating die sets your bullet to the depth you dial in. These run on standard 7/8-14 threads, so they'll thread right into just about any single stage press you already own.
Built Around Lee's Decapping Design
The sizing die uses Lee's collet-type decapper clamp, which keeps the expander centered and lets the decapping pin slide up and out of the way if it hits an obstruction instead of snapping off. That's a real plus with old brass, which can hide crimped primers and the occasional surprise. The shank is stout enough to drive out a stuck case without wrecking the die, and the honed internal finish helps cases slide through clean.
Everything in the Lee 6.5 Japanese Die Set
This isn't just the dies in a box. Lee includes a universal shell holder sized for the case, a powder dipper, and an instruction sheet with starting load data, so a reloader who's new to this caliber has a reference point to work from. The dies carry Lee's guarantee of accuracy, and the steel construction holds up to years of use on the bench. For anyone keeping a vintage Japanese service rifle running, this is a practical, no-nonsense way to make your own ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90730
- UPC: 734307907303
- Caliber: 6.5 Japanese (6.5x50mm Arisaka)
- Die Set: 2-Die Pacesetter, Full-Length
- Number of Dies: 2
- Die Types: Full-Length Sizing, Bullet Seating
- Thread Size: 7/8-14
- Material: Steel
- Shell Holder Included: Yes (Universal)
- Production: Limited Production
- Country of Origin: United States
- Shipping Weight: 0.94 lb
What’s Included
- Full-length sizing die
- Bullet seating die
- Universal shell holder
- Powder dipper
- Instructions and load data sheet
Frequently Asked Questions
What cartridge does the Lee Pacesetter 2-Die Set work with?
This set is cut for the 6.5 Japanese cartridge, also listed as the 6.5x50mm Japanese Arisaka. It's the round used in the old Arisaka Type 38 and Type 44 service rifles. If your rifle is chambered in 6.5x50mm, this is the correct die set.
Does this Lee 6.5 Japanese die set include a shell holder?
Yes. Lee includes a universal shell holder sized for the 6.5x50mm case right in the box, along with a powder dipper and load data. That means you don't have to track down a separate shell holder to get started.
Will these dies fit my reloading press?
The dies use standard 7/8-14 threads, which is the common size for single stage presses. If you're running a typical Lee, RCBS, Hornady, or similar single stage press, they'll thread right in. Most reloaders report these turn out solid ammo on a standard setup.
Does this set come with a factory crimp die?
No, this is a 2-die set, so it includes the full-length sizing die and bullet seating die only. The Limited Production Pacesetter line carries the same quality as Lee's standard dies but does not add a factory crimp die. You can seat and apply a light crimp using the seating die if your load calls for it.




Reviews
There are no reviews yet.