Description
Casting your own .45 bullets is one of the most satisfying ways to stretch a reloading budget, and the Lee 90697 six-cavity mold is built to crank them out in a hurry. Each pour drops six .452 diameter, 200 grain round flat nose bullets that work across .45 ACP, .45 Auto Rim, and .45 Colt. The round nose profile with a flat point feeds smoothly and makes a clean hole on paper, which is exactly what most pistol casters are after.
What Sets the Lee 200gr RF 6-Cavity Mold Apart
The blocks are machined from commercial quality aluminum, so they won't rust the way old cast iron molds do, and they come in at roughly a third of the weight of iron or steel blocks. That lighter weight means a lot less hand fatigue during long casting sessions. Aluminum also heats up and cools down faster, so you get good bullets after just a few throwaway casts and can switch molds mid-session by dipping a corner in the melt.
Built for Volume With the 452-200-RF Blocks
This is a true production tool. The cavities are lathe bored for consistent roundness and sizing, and the blocks ride on steel bushings and alignment pins to keep everything registering the same way pour after pour. The hard-anodized sprue plate is cam operated and held down with spring washers on each end, which cuts the sprue cleanly without the pounding you get on cheaper molds. Casters consistently point to the clean fit and finish and how fast it churns out bullets once the rhythm sets in.
A Few Things to Know Before You Pour
Heads up: the mold blocks ship without handles. You'll need a set of Lee six-cavity mold handles to run it, and they're worth having on hand before your first casting day. Lee also recommends skipping spray-type mold release products in their molds. Pair this with a good lead pot, a sizing setup, and your lube of choice and you've got a steady supply of .45 bullets for range work and plinking.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90697
- UPC: 734307906979
- Caliber: .45 (.452 Diameter)
- Cartridges: .45 ACP / .45 Auto Rim / .45 Colt
- Bullet Weight: 200 Grain
- Bullet Profile: Round Flat Nose (452-200-RF)
- Cavities: 6
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized, Cam Operated
- Alignment: Steel Bushings and Alignment Pins
- Length: 13.1 in
- Country of Origin: United States
What’s Included
- Lee 90697 six-cavity bullet mold blocks (452-200-RF)
- Cam-operated hard-anodized sprue plate (attached)
Frequently Asked Questions
Does the Lee 90697 6-cavity mold come with handles?
No, the mold blocks ship without handles. You'll need to add a set of Lee six-cavity mold handles (part 90005) to run it. It's a common gotcha, so grab a pair before your first casting session.
What cartridges will the 452-200-RF bullets work for?
This mold produces .452 diameter 200 grain round flat nose bullets suited for .45 ACP, .45 Auto Rim, and .45 Colt. It's a versatile pick if you shoot more than one .45 handgun. As with any cast bullet, you'll want to size and lube before loading.
Why choose an aluminum mold over cast iron or steel?
Lee's aluminum blocks resist rust and weigh about a third of what iron or steel molds do, which reduces hand fatigue during long runs. They also heat up and cool down faster, so you reach good casting temperature quickly and spend less time waiting between pours.
How many bullets does this mold cast at once?
Six per pour, which is what makes it a go-to for volume production. The lathe-bored cavities and steel alignment pins keep sizing consistent cast after cast. Once you get the mold up to temperature and into a rhythm, it churns out .45 bullets fast.




Reviews
There are no reviews yet.