0
0

Lee Collet 2-Die Set .338 Lapua Magnum Large Series 1 1/4×12

UPC: 734307906351

$95.99

15 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a .338 Lapua Magnum bolt gun and you want your reloads to group tighter without beating up your brass, the Lee Collet 2-Die Set is one of the smartest tools you can put on the bench. Instead of dragging an expander ball through the case neck like a conventional die, the collet system squeezes the neck against a central mandrel. That means a neck sized evenly from top to bottom with very little runout, which is exactly what you want when you're chasing accuracy at long range with a cartridge this capable.

This is the Large Series set, so it uses the 1 1/4 x 12 thread pattern and is made specifically for the Lee Classic Cast Press. The larger thread size won't fit a standard press, so keep that in mind if you're building out your setup. The set covers the two jobs that matter most for neck-sized precision loads: the collet neck sizing die handles the brass, and the bullet seating die gets your projectile seated straight and consistent.

How the .338 Lapua Collet Die Earns Its Keep

The appeal here is consistent neck tension and gentler treatment of your brass. Because nothing gets pulled back through the inside of the neck, you avoid the stretching and extra working that wears cases out early. For .338 Lapua brass, which isn't cheap, that longer case life adds up. Reloaders who run these dies often report very tight groups once they've dialed in their technique, and the method is well known for keeping the neck-to-shoulder area crisp.

Getting the Most Out of Your Lee Collet Set

These dies reward a steady hand. You raise the ram with a fired case, apply firm and consistent downward pressure on the handle (around 25 pounds is the commonly cited figure), and let the collet do the work. If you want more neck tension, the proven route is slightly reducing the mandrel diameter rather than cranking harder on the press. Take your time aligning the case on the way in and you'll get clean, repeatable results load after load. For folks who already run a Classic Cast Press and load .338 Lapua, this set is a well-regarded way to tighten things up.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 90635
  • UPC: 734307906351
  • Cartridge: .338 Lapua Magnum
  • Series: Large Series
  • Thread Size: 1 1/4 x 12
  • Number of Dies: 2
  • Die Types: Collet Neck Sizing Die, Bullet Seating Die
  • Material: Steel
  • Compatible Press: Lee Classic Cast Press only
  • Required Shell Holder: #25 (sold separately)
  • Country of Origin: United States
  • Shipping Weight: 2.02 lbs

What’s Included

  • Collet Neck Sizing Die
  • Bullet Seating Die
  • Instructions

Frequently Asked Questions

What press does the Lee Collet 2-Die Set .338 Lapua fit?

This is a Large Series set with a 1 1/4 x 12 thread, so it's made for the Lee Classic Cast Press only. It will not thread into a standard press that uses the common 7/8 x 14 die size. If you're running the Classic Cast, you're good to go.

Does this set include a shell holder or powder dipper?

No. The set comes with the collet neck sizing die, the bullet seating die, and instructions. You'll need the #25 shell holder separately to complete your setup, and no powder dipper is included.

How is a Lee collet die different from a regular neck sizing die?

A standard die sizes the neck by squeezing it through a hole and then pulling an expander ball back through the inside. The Lee collet die instead uses split fingers to press the case neck against a central mandrel, which produces a very straight neck with minimal runout. It also works the brass less, so your .338 Lapua cases tend to last longer.

Can I adjust neck tension with the Lee Collet Die?

There's no mechanical tension dial, so cranking harder on the handle won't change it. The accepted way to increase neck tension is to slightly reduce the mandrel diameter or order a smaller mandrel from Lee. Most reloaders find the factory setup works well right out of the gate once they get a feel for the sizing stroke.

Additional information

UPC

734307906351

Manufacturer

Manufacturer Part Number

90635

Shipping Weight

2.02

Reviews

There are no reviews yet.

Be the first to review “Lee Collet 2-Die Set .338 Lapua Magnum Large Series 1 1/4×12”