Description
The Lee Precision Pacesetter 3-Die Rifle Set covers the full reloading cycle for the 6.5×55 Swedish Mauser without making you buy pieces separately. You get a full-length sizing die to bring fired brass back to spec, a bullet seating die for setting your projectiles where you want them, and the Lee Factory Crimp Die to finish things off. For the 6.5 Swede crowd running old military Mausers and modern sporters alike, this is a practical, no-nonsense way to start turning out your own ammo.
What the Pacesetter 3-Die Set Brings to the Bench
The full-length sizer resizes the whole case body, which makes it the right pick when you're working with mixed range brass or rounds that need to chamber reliably across more than one rifle. The bullet seater handles overall length, and the Factory Crimp Die is the piece a lot of handloaders swear by. It applies a firm, repeatable crimp that tightens up consistency and helps your loads behave more like factory ammo. Lee has been building reloading gear since 1958, and these dies are machined from steel with smooth, honed internals.
Fitting the 6.5×55 Dies to Your Press
These use the standard 7/8 by 14 thread, so they thread right into common single-stage and turret presses from Lee, RCBS, Hornady, Lyman, Dillon and others. Because this is a full-length set rather than a carbide pistol setup, you will want case lube before sizing your bottleneck 6.5×55 brass. That's normal for rifle dies and just part of the routine.
In the Box With the Lee Pacesetter Set
Along with the three dies, the set ships with the correct shell holder, a powder dipper, instructions and load data, all tucked into Lee's molded storage box. It's a complete starting point for anyone new to loading the 6.5 Swede, and a reliable workhorse for folks who've been at the bench for years.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90627
- UPC: 734307906276
- Caliber: 6.5×55 Swedish Mauser
- Product Type: Pacesetter Rifle Dies w/Shell Holder
- Die Set: 3-Die (Full Length Sizer, Bullet Seater, Factory Crimp)
- Die Series: Pacesetter
- Thread: 7/8-14 standard
- Material: Steel
- Shell Holder: Included
- Country of Origin: United States
What’s Included
- Full Length Sizing Die
- Bullet Seating Die
- Lee Factory Crimp Die
- Shell holder
- Powder dipper
- Instructions and load data
- Molded storage box
Frequently Asked Questions
Which dies come in the Lee Pacesetter 3-Die Set for 6.5×55?
You get three dies: a full-length sizing die, a bullet seating die, and the Lee Factory Crimp Die. The set also includes the correct shell holder, a powder dipper, and load data. That covers sizing, seating, and crimping for the 6.5×55 Swedish Mauser.
Will these dies fit my press?
Yes, as long as your press takes standard dies. The Pacesetter dies use the common 7/8 by 14 thread, so they fit single-stage and turret presses from Lee, RCBS, Hornady, Lyman, Dillon and others. No adapters needed for those.
Do I need case lube with this set?
Yes. This is a full-length steel sizing set for a bottleneck rifle cartridge, so you'll want to lubricate your 6.5×55 brass before sizing. That keeps cases from sticking in the die and is standard practice for rifle reloading.
What does the Factory Crimp Die do?
The Lee Factory Crimp Die applies a consistent crimp that helps your handloads perform more like factory ammunition. It improves round-to-round consistency and can help with accuracy. The crimp is adjustable from a slight taper to a full roll depending on how you set it.





Reviews
There are no reviews yet.