Description
The .45-70 Government is one of those classic cartridges that rewards handloaders. Factory ammo gets pricey fast and the options are limited, so running your own brass through a good set of dies just makes sense for anyone feeding a lever gun or single-shot. This Lee Pacesetter 3-die set covers the core steps of loading this big straight-wall round and comes with the extras Lee is known for throwing in the box.
What the Lee Pacesetter .45-70 Set Does on the Bench
The set runs three dies. The full-length sizing die brings your fired brass back to spec, which is exactly what you want when you're working with mixed or once-fired range cases that need to chamber reliably. The powder-through expanding die opens up the case mouth so your cast or jacketed bullets seat clean, and it lets you drop powder through the die to keep your workflow moving. Rounding it out is the dead length bullet seating die with an adjustable taper that can roll crimp, giving you control over seating depth as you dial in a load.
Why Reloaders Keep Reaching for the Pacesetter Dies
Lee machines these from steel and backs them with a reputation for solid value. A lot of folks who load lower-volume or older calibers lean on Lee gear for exactly that reason, and the straight-wall .45-70 case plays nicely with this kind of die set. The included load data sheet is a genuinely useful touch, especially on a cartridge with as much loading history and variety as the .45-70.
What Comes With the .45-70 Pacesetter Kit
Beyond the three dies, Lee includes a universal shell holder and a powder dipper right in the box, plus instructions and load data. That means you can bring this home and start setting up without hunting down a separate shell holder first. Worth knowing: if you plan to load Hornady LEVERevolution brass, those cases use a special crimp and Hornady makes a dedicated factory crimp die for them that you'd add separately. For standard mixed .45-70 brass, this set has you covered.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90561
- UPC: 734307905613
- Caliber: .45-70 Government
- Die Series: Pacesetter
- Die Type: 3-Die Set
- Dies In Set: 3
- Material: Steel
- Shell Holder: Included (Universal)
- Application: Rifle Reloading
- Length: 4.9 in
- Shipping Weight: 1.225 lbs
What’s Included
- Full-length sizing die
- Powder-through expanding die
- Dead length bullet seating die (adjustable taper roll crimp)
- Universal shell holder
- Powder dipper
- Instructions and load data sheet
Frequently Asked Questions
What dies come in the Lee Pacesetter .45-70 set?
This Pacesetter set includes three dies: a full-length sizing die, a powder-through expanding die, and a dead length bullet seating die with an adjustable taper that can roll crimp. It's a complete three-die setup for the core steps of loading .45-70 Government. Lee also tosses in a universal shell holder, a powder dipper, and load data.
Does this Pacesetter set include a Lee Factory Crimp Die?
No. The Pacesetter 3-die sets carry the same quality as Lee's standard dies but swap the factory crimp die for a powder-through expanding die. If you want a dedicated factory crimp die for your .45-70, Lee sells one separately.
Will this work with mixed or once-fired range brass?
Yes, the full-length sizing die is built to bring mixed and range brass back to spec so it chambers reliably. That's a big part of why many loaders pick a full-length set for a cartridge like the .45-70. Just note that Hornady LEVERevolution cases use a special crimp and are best handled with Hornady's dedicated factory crimp die.
Do I need to buy a shell holder separately?
No, the correct universal shell holder is included right in the box along with a powder dipper. That makes this a convenient starting point, since you won't have to track down a matching shell holder before you can set the dies up on your press.




Reviews
There are no reviews yet.