Description
The Lee Precision TL356-124-2R is a double cavity mold built to cast .356" round nose bullets at 124 grains, the sweet spot for plinking and range loads in 9mm Luger. That same .356 projectile also works for .38 Super and .380 Auto, so one set of blocks covers a few popular pistol calibers. Each pour drops two bullets at a time, which keeps your rhythm moving once the blocks come up to temperature.
This is a tumble lube (TL) design, meaning the bullet has shallow micro grooves made for liquid lube like Lee's Alox. You coat the cast bullets, let them dry on waxed paper, and skip the traditional lube sizer step for a lot of casual loads. It's a simple, low fuss way to lube bullets, and it's a big reason this mold is a favorite among folks loading high volume 9mm for the range.
Why the TL356-124-2R Casts So Nicely
Lee machines these blocks from aluminum, so they're rust resistant, lightweight, and they heat up and cool down faster than iron or steel molds. The practical upside is that good bullets usually start dropping after just a few casts, and the lighter blocks mean less hand fatigue during a long session. The cavities are CNC machined for tight roundness and size control, and most bullets can be loaded as cast.
Getting Started With Your Lee 9mm Mold
Like all Lee molds, this one casts best once it's seasoned. A quick "smoking" with a wooden match, a bit of candle soot, or a butane lighter helps the first bullets release clean and fill out properly. Getting the blocks up to proper casting temperature is the single biggest factor in nice, well formed bullets, so give it a little warm up time before you judge your results. Many casters who shoot 9mm run their cast bullets through a push through sizer to dial in diameter, which can tighten up accuracy and cut down on rejects.
The mold includes handles and a cam operated sprue plate, so it's ready to go as a complete casting setup. For anyone wanting to stretch a pound of lead a lot further than buying factory bullets, this is a proven, budget friendly way to roll your own 9mm.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90464
- Model: TL356-124-2R
- UPC: 734307904647
- Caliber: 9mm (also .38 Super, .380 Auto)
- Bullet Diameter: .356"
- Bullet Weight: 124 grains
- Bullet Style: Round Nose, Tumble Lube
- Number of Cavities: 2
- Block Material: Aluminum
- Country of Origin: United States
- Shipping Weight: 0.675 lbs
What’s Included
- Lee TL356-124-2R two cavity bullet mold blocks
- Mold handles
- Cam operated sprue plate
- Instructions
Frequently Asked Questions
What calibers can I load with this Lee 9mm bullet mold?
It casts a .356 diameter 124 grain round nose bullet, which is the standard projectile for 9mm Luger. The same bullet also works well for .38 Super and .380 Auto. It's a versatile set of blocks if you load more than one of those pistol cartridges.
Does this mold come with handles?
Yes. The Lee TL356-124-2R includes the mold handles and a cam operated sprue plate, so it's a complete casting setup out of the box. You'll still need your own lead pot, melt, and lube to start casting.
What does the tumble lube design mean?
The TL in the model name stands for tumble lube. The bullet has shallow micro grooves designed for liquid lube like Lee Alox, so you coat the bullets, let them dry, and load them. It's a quick, low fuss alternative to running every bullet through a traditional lube sizer.
Do I need to size the bullets after casting?
Many casters load these as cast with good results, since Lee cavities are machined for tight roundness. That said, running them through a push through sizer to set a consistent diameter can improve accuracy and reduce leading, especially if your barrel slugs a touch larger. A little testing in your specific pistol goes a long way.




Reviews
There are no reviews yet.