Description
This Lee double cavity mold casts .575 diameter round balls that run right around 285 grains, making it a go-to for anyone shooting a .58 caliber muzzleloader with a bore somewhere near .580. A lot of folks running Green Mountain, Sharon, and similar .58 barrels land on the .575 ball because that slightly larger diameter gives you a tight, accurate patched round ball combination once you dial in your patch thickness. Keep in mind round balls work best with slower twist rates like 1:66 or smooth bores, so it pairs nicely with traditional-style rifles.
What the Lee .575 Round Ball Mold Is Made Of
Lee machines these mold blocks from aluminum, which buys you a few real advantages at the casting pot. Aluminum won't rust the way iron or steel blocks can, it heats up and cools down quicker so you're casting good balls after only a few pours, and it weighs about a third of what an iron mold does. That lighter weight adds up when you're running a long session and your arm starts to feel it. The block halves are CNC machined for roundness and consistent sizing, and the cavity is formed with a carbide ball for a uniform casting every time.
Casting Two Balls at a Time
The double cavity design means you drop two balls per pour instead of one, which doubles your output and gets you to a full ball bag a lot faster. This one ships complete with the handles and a sprue plate, so you're ready to melt lead as soon as it shows up. A quick tip from experience: Lee advises against spray mold releases, which can build up in the cavity and shrink your ball diameter. Smoking the cavity lightly with a wooden match or butane lighter is the old-school way to get clean, consistent drops right out of the gate.
Actual cast weight can shift a little depending on the lead alloy you use, with pure soft lead being the traditional choice for patched round balls. Treat the aluminum blocks with a little care since they're softer than steel, and a quality mold like this will keep cranking out balls for years.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90461
- UPC: 734307904616
- Ball Diameter: .575 in
- Projectile Type: Round Ball
- Nominal Ball Weight: 285.38 gr
- Cavity Count: Double (2) Cavity
- Block Material: Aluminum
- Suited For: .58 Caliber Muzzleloaders
- Overall Length: 10.85 in
- Country of Manufacture: United States
What’s Included
- Lee .575 double cavity round ball mold blocks
- Mold handles
- Sprue plate
- Instructions
Frequently Asked Questions
What caliber muzzleloader does the .575 round ball mold work with?
The .575 ball is commonly used in .58 caliber muzzleloaders, especially barrels running close to a .580 bore. Many shooters pair it with Green Mountain, Sharon, and similar barrels. Since every barrel is a little different, you may need to experiment with patch thickness to find the tightest accurate load.
Does the Lee .575 mold come with handles?
Yes, this mold ships complete with the handles and a sprue plate, so you have what you need to start casting right away. That's a nice touch since some molds on the market sell the handles separately.
Why is the mold made of aluminum instead of steel?
Aluminum blocks won't rust, they heat up and cool down faster than iron or steel so you get good balls after just a few casts, and they weigh about a third as much to cut down on fatigue during long sessions. The one trade-off is that aluminum is softer than steel, so handle the blocks gently and they'll last for years.
Will my cast balls weigh exactly 285.38 grains?
The 285.38 grain figure is Lee's nominal weight based on a suggested alloy, and your actual cast weight can vary a bit depending on the lead mixture you pour. Pure soft lead is the traditional choice for patched round balls in a muzzleloader. Also avoid spray mold releases, which can build up in the cavity and reduce ball diameter.





Reviews
There are no reviews yet.