Description
Loading your own .380 ACP is one of the best ways to keep a hungry pocket pistol fed, and the Lee Precision 90447 gives you everything you need to turn out consistent rounds. This is the Deluxe Pistol setup, which means it builds on Lee's well-known carbide three-die arrangement and adds the Carbide Factory Crimp Die. That extra die is the heart of the set, because it lets you handle seating and crimping as two separate steps instead of fighting both at once.
What Sets the 90447 Carbide Die Set Apart
The carbide full-length sizing die is the big draw here. Carbide resizes straight-walled handgun brass without the need to lube every case, which saves a messy step and speeds up your whole session. The decapper knocks out spent primers during sizing, the powder-through expanding die flares the case mouth so bullets start straight, and the micrometer bullet seating die lets you dial in a precise seating depth and come right back to it after a bullet swap. Keep a note of your settings and you'll never have to re-find a load again.
Why the Factory Crimp Die Matters
The Carbide Factory Crimp Die is what makes this set worth stepping up to. As your loaded round passes through, the die post-sizes the case, which means any cartridge that clears the die is going to chamber properly in your gun. That's a big deal with .380, where overall length and crimp are tight and finicky. If you run mixed range brass or cases that were fired in other pistols, this final sizing pass is cheap insurance against a round that won't seat.
Built for the .380 Bench
Everything tucks into Lee's flat four-die box with an airtight cover, so your precision-machined dies stay clean and rust-free between loading days. The set is caliber-specific to .380 Auto and works on any standard single-stage or turret press that takes 7/8-14 die threads. For anyone shooting enough .380 to justify rolling their own, this is a proven, no-nonsense kit that punches well above its weight.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90447
- Model: Deluxe Pistol Carbide 4-Die Set
- UPC: 734307904470
- Caliber: .380 ACP / .380 Auto
- Number of Dies: 4
- Die Material: Carbide
- Die Thread: 7/8-14
- Case Lube Required: No (carbide sizing die)
- Seating Die: Micrometer Bullet Seating Die
- Crimp: Carbide Factory Crimp Die
- Country of Origin: United States
- Shipping Weight: 1.5 lb
What’s Included
- Carbide Full Length Sizing Die with Decapper
- Powder Through Expanding Die
- Micrometer Bullet Seating Die
- Carbide Factory Crimp Die
- Universal Shell Holder
- Powder Dipper
- Instructions and Load Data
- Flat four-die storage box with airtight cover
Frequently Asked Questions
Do I need to lube my cases with the Lee 90447 .380 ACP die set?
No. The sizing die in this set is carbide, so it resizes straight-walled .380 brass without any case lube. That saves you the lubing and cleaning steps and keeps your loading session moving faster.
What makes this a 4-die set instead of the standard 3-die set?
The fourth die is the Carbide Factory Crimp Die. It separates crimping from bullet seating, so each step is easier to adjust on its own. It also post-sizes the finished round, which helps guarantee reliable chambering, especially with mixed or once-fired brass.
Will the Lee 90447 dies fit my press?
Yes, as long as your press accepts standard 7/8-14 die threads, which covers nearly all single-stage, turret, and progressive presses. A universal shell holder is included, so you have what you need to get set up and loading .380 ACP right away.
Does this set include a micrometer seating die?
The current Deluxe version of the 90447 ships with a micrometer bullet seating die. Once you dial in the seating depth for a given bullet, you can record the setting and return to it exactly, which is handy if you load more than one .380 bullet profile.




Reviews
There are no reviews yet.