Description
This Lee double cavity mould (part number 90378) casts the 375-130-1R conical bullet, a .375" diameter 130-grain round nose designed for .36 caliber Colt and Remington cap and ball revolvers. Each pour drops two bullets, so you build up your stash quicker than a single cavity setup, and the one ogive radius profile is shaped to seat straight and true in your chamber mouths. Two lube grooves run around the body to help cut down on fouling and keep things running clean through a longer range session.
Why the 90378 Mould Blocks Are Aluminum
Lee machines these blocks from aluminum instead of iron or steel, and there's a real reason behind it. Aluminum heats up and cools down faster, so you can get good bullets dropping after just a handful of casts rather than waiting around for a cold block to come up to temperature. The blocks won't rust, lead won't stick to them, and they weigh about a third of what steel blocks do, which your forearm will appreciate during a long casting run. The tradeoff is that aluminum is softer than blued steel, so treat the mould gently, especially during break-in, and it'll keep dropping clean bullets for years.
Loading the Lee .375" Conical in a Cap and Ball Revolver
The 130-grain conical carries noticeably more mass than a round ball, which translates to deeper penetration and more downrange energy. Compared to a patched round ball, the conical does ask a little more from you at the loading lever since it needs to go in square to shoot well. Plenty of folks run these happily in their Navy and Army pattern revolvers, and they shine for plinking and putting serious thump on a target. If you're chasing tight groups at longer distance, keep in mind that many cap and ball shooters find round balls easier to keep accurate, though the extra weight of the conical makes it a favorite for anyone who wants more punch.
What Comes With the Lee 90378 Conical Mould
The mould ships complete with its hardwood handles and a hard anodized steel sprue plate, so you're ready to cast right out of the box once your pot is up to temperature. An instruction sheet is included to walk you through setup and break-in.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90378
- UPC: 734307903787
- Bullet Design: 375-130-1R (1 Ogive Radius Conical)
- Bullet Diameter: 0.375 inch
- Bullet Weight: 130 grains
- Caliber: .36 Caliber Cap and Ball
- Cavities: 2 (Double Cavity)
- Bullet Profile: Round nose conical with two lube grooves
- Block Material: CNC machined aluminum
- Sprue Plate: Hard anodized steel
- Handles: Hardwood, included
- Length: 10.6 inches
- Country of Origin: United States
What’s Included
- Lee double cavity .375" 130 gr conical mould (90378)
- Hardwood mould handles
- Hard anodized steel sprue plate
- Instruction sheet
Frequently Asked Questions
What revolvers does the Lee 90378 conical mould work with?
It's made for .36 caliber cap and ball revolvers, including Colt and Remington pattern guns and most Italian made replicas like the 1851 Navy. The bullet drops at .375" diameter, which matches the chamber mouths on those revolvers. If your Navy or Army likes a .375" round ball, this conical is sized to work in the same gun.
How many bullets does this mould cast per pour?
This is a double cavity mould, so it drops two 130-grain .375" conical bullets with each pour from your lead pot. That doubles your output compared to a single cavity mould and helps you build up a supply faster. Handles and the sprue plate come included so you can run it as soon as your pot is hot.
Why is the mould made from aluminum instead of steel?
Aluminum blocks heat up and cool down quicker than iron or steel, so you get usable bullets after only a few casts rather than waiting for the block to warm up. They also won't rust, lead won't adhere to them, and they weigh about a third of what steel blocks do, which cuts down on fatigue during long sessions. Just remember aluminum is softer, so handle it gently during break-in.
How does the 130-grain conical compare to a round ball?
The conical carries more mass than a round ball, giving you deeper penetration and more downrange energy. It does take a bit more care to load straight since it needs to seat square in the chamber. Many cap and ball shooters find round balls a touch easier to keep tight at distance, but the conical's extra weight makes it a popular pick for anyone wanting more punch on target.




Reviews
There are no reviews yet.