Description
If you shoot the .41 Remington Magnum and want to take control of your bullet supply, the Lee Precision TL410-210-SWC double cavity mold drops a .410 diameter, 210-grain semi-wadcutter every cast. The semi-wadcutter nose punches clean holes in paper and hits hard on game and steel, which has made it a go-to profile for revolver shooters for decades. With two cavities, you get two bullets per pour, so a casting session moves right along.
What Sets the TL410-210-SWC Apart
The TL in the name stands for Tumble Lube. This bullet design carries micro-banded grooves along the body built specifically for Lee's Liquid Alox style tumble lubing, so you skip the traditional lube-sizer routine and just coat, dry, and load. For a lot of casters that is the fastest, least fussy way to get finished bullets ready to go.
Aluminum Blocks Built for Real Casting
Lee machines the blocks from aluminum, which is a big part of why these molds are so pleasant to run. Aluminum resists rust, heats up quickly when you start a session, and cools faster between pours. It also weighs about a third of what iron or steel blocks weigh, so your hands and wrists hold up better during long sittings at the pot. The cavities are CNC machined for roundness and size control, and the tangential cut-off helps clean up the sprue nip for a tidy bullet base.
A Few Casting Pointers
Aluminum molds like to run hot, so give the blocks time to come up to temperature and expect the first handful of bullets to go back in the pot until things even out. Lee lists bullet weight based on their suggested alloy, so a softer, lead-heavy mix may run a touch heavier. Lee also recommends against spray mold releases, instead suggesting you smoke the cavities with a wooden match, beeswax candle, or butane lighter per the included instructions.
Key Specifications
- Manufacturer: Lee Precision
- Model: TL410-210-SWC
- Manufacturer Part Number: 90335
- UPC: 734307903350
- Caliber: 41 Remington Magnum
- Bullet Diameter: .410 inch
- Bullet Weight: 210 Grains
- Bullet Style: Tumble Lube Semi-Wadcutter
- Number of Cavities: 2 (Double Cavity)
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized
- Handle Material: Hardwood
- Gas Check: No
- Country of Origin: USA
What’s Included
- Lee double cavity mold blocks (TL410-210-SWC)
- Hardwood mold handles
- Hard anodized sprue plate
- Instruction sheet
Frequently Asked Questions
What cartridge is the Lee TL410-210-SWC mold made for?
It casts a .410 diameter, 210-grain semi-wadcutter bullet suited to the .41 Remington Magnum. The weight and profile are a classic match for .41 Mag revolvers used for target work, hunting, and general range shooting. Final weight can vary slightly depending on your alloy.
Does this mold come with handles?
Yes. The 90335 ships with hardwood handles and the hard anodized sprue plate included, so you have everything you need to start casting. You'll still want a melting pot, alloy, and a lead ladle or bottom-pour furnace separately.
What does the TL in TL410-210-SWC mean?
TL stands for Tumble Lube. The bullet is designed with micro grooves for Lee's Liquid Alox style tumble lubing, which lets you coat and dry your bullets without running them through a traditional lube-sizer. It's a quick, low-mess way to finish cast bullets.
Why are Lee molds made from aluminum?
Aluminum blocks resist rust and both heat up and cool down faster than iron or steel. They're also about a third of the weight, which cuts down on hand fatigue during long casting sessions. Just remember aluminum molds like to run hot, so let the blocks warm up before you expect good bullets.




Reviews
There are no reviews yet.