0
0

Lee 358-140-SWC Double Cavity Bullet Mould .358″ 140gr w/Handles

UPC: 734307903183

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee 358-140-SWC is a double cavity pistol bullet mould that drops two .358 diameter, 140 grain semi-wadcutter bullets with every pour. That semi-wadcutter profile is a longtime favorite for revolver work, cutting clean holes in paper and feeding well through .38 Special, .38 S&W, .38 Colt New Police, and .357 Magnum. Lee lists the bullet at a .643 inch overall length with a ballistic coefficient of .142, and the crimp groove sits .295 inches back from the nose, so it drops right into standard load data for those cartridges.

Why the 358-140-SWC Mould Keeps Casters Happy

Lee machines every mould block from aluminum, and that choice pays off at the pot. Aluminum heats up and cools down noticeably faster than iron or steel, so you can start throwing usable bullets after just a few casts instead of babying the mould to temperature for ages. The blocks also run about a third the weight of steel, which your forearm will thank you for during a long casting session. Aluminum won't rust and lead won't stick to it, so cleanup and long-term storage are low drama.

Consistent Bullets From the 358-140-SWC Double Cavity

The cavities are CNC machined for tight roundness and size control, and most bullets come out of a Lee mould ready to shoot as-cast without sizing, depending on your alloy and gun. The sprue plate shears cleanly for neat sprues and less flash, which keeps your rhythm going.

One thing worth knowing: aluminum blocks are softer than blued steel, so a gentle break-in on the first few sessions and careful handling go a long way toward making this mould last. Treat it right and it'll keep dropping good bullets for years. Handles and sprue plate are included, so you can open the box and get to casting.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90318
  • UPC: 734307903183
  • Model: 358-140-SWC
  • Bullet Diameter: 0.358"
  • Bullet Weight: 140 grain
  • Bullet Type: Semi-Wadcutter (SWC)
  • Cavities: Double Cavity
  • Block Material: Aluminum
  • Suitable Cartridges: .38 Special, .38 S&W, .38 Colt New Police, .357 Magnum
  • Bullet Overall Length: 0.643"
  • Ballistic Coefficient: .142
  • Crimp Groove to Nose: 0.295"
  • Country of Manufacture: United States

What’s Included

  • Lee 358-140-SWC double cavity bullet mould
  • Mould handles
  • Sprue plate

Frequently Asked Questions

What cartridges will the Lee 358-140-SWC mould work for?

This mould casts a .358 diameter, 140 grain semi-wadcutter bullet that suits .38 Special, .38 S&W, .38 Colt New Police, and .357 Magnum. The semi-wadcutter nose is a classic choice for revolver target work and general range loads. Always check your reloading manual or the powder maker's data for the right charge.

Does the 358-140-SWC mould come with handles?

Yes. Handles and the sprue plate are included with this mould, so it's ready to use straight out of the box. Just note the handles are permanently attached to the block style common to Lee's double cavity moulds.

Why does Lee use aluminum blocks instead of steel?

Aluminum heats up and cools down faster than iron or steel, so you get usable bullets after only a few casts. The blocks are also roughly a third the weight of steel, which cuts down on fatigue during long sessions, and they won't rust. The tradeoff is that aluminum is softer, so gentle handling and a proper break-in help the mould last.

Do the bullets need to be sized after casting?

Most bullets from Lee moulds can be used as-cast without sizing, though it depends on your alloy and the throat and groove dimensions of your specific gun. Many casters slug their bore to confirm fit. If you do need sizing, a .358 or .359 sizer will get you there.

Additional information

UPC

734307903183

Manufacturer

Manufacturer Part Number

90318

Bullet Weight (Grains)

140

Caliber/Gauge

.38 Caliber

Shipping Weight

0.8813

Reviews

There are no reviews yet.

Be the first to review “Lee 358-140-SWC Double Cavity Bullet Mould .358″ 140gr w/Handles”