Description
Casting your own 45-caliber bullets gets a whole lot faster with the Lee 90310 six-cavity mould. It drops six .452 diameter 200 grain semi-wadcutter bullets per pour, which means fewer trips back to the pot and more rounds ready to load at the end of a session. That classic SWC nose profile punches clean holes in paper and feeds well through most 45 ACP, 45 Colt, and 45 Auto Rim setups, making it a go-to projectile for target work and general range shooting.
What Sets the Lee 90310 Semi-Wadcutter Mould Apart
Like the rest of Lee's lineup, the block halves are machined from aluminum. That matters more than it sounds. Aluminum heats up and cools down faster than iron or steel, so you're getting good bullets after just a few casts instead of fighting a cold mould. It's also roughly a third of the weight of steel blocks, which your hands will thank you for during a long casting run. On top of that, aluminum is rust resistant, so storage between sessions is low-stress. The cavities are CNC machined for tight roundness and consistent sizing, and the hard-anodized sprue plate with cam action takes the pounding out of cutting your sprue.
Loading With the 452-200-SWC Six-Cavity Mould
This mould produces a bullet with a .637 inch overall length and a listed ballistic coefficient of .127. The 200 grain weight is based on Lee's suggested alloy, so your actual bullet weight can shift a little depending on the mix you're running. Many casters find Lee moulds drop bullets close enough to size that they can run them as-cast, though a quick pass through a sizing and lube setup is always an option for a tighter fit.
One thing to keep in mind: this particular mould comes as the block halves and sprue plate only. The six-cavity handles (Lee part 90005) are sold separately, so grab a set if you don't already have one in your kit. Once you're set up, this is the kind of mould that earns its spot on the bench for anyone burning through a lot of 45 downrange.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90310
- Model: 452-200-SWC
- UPC: 734307903107
- Caliber: .45 Caliber
- Bullet Diameter: .452 inches
- Bullet Weight: 200 Grains
- Bullet Style: Semi-Wadcutter (SWC)
- Number of Cavities: 6
- Block Material: Aluminum
- Sprue Plate: Hard Anodized with Cam Action
- Bullet Overall Length: .637 inches
- Ballistic Coefficient: .127
- Suitable Cartridges: 45 ACP, 45 Colt, 45 Auto Rim
- Handles: Sold Separately (Lee 90005)
- Shipping Weight: 1.2188 lbs
What’s Included
- Two aluminum mould block halves
- Hard-anodized sprue plate with handle
Frequently Asked Questions
Do the handles come with the Lee 90310 mould?
No, this version of the 90310 includes the aluminum block halves and the sprue plate only. The six-cavity handles are Lee part number 90005 and are sold separately. If you're new to casting, plan on picking up a set so you can actually run the mould.
What cartridges can I load with these 200 grain semi-wadcutter bullets?
The .452 diameter 200 grain SWC bullet is a great fit for 45 ACP, 45 Colt, and 45 Auto Rim. The semi-wadcutter profile cuts clean holes in paper, which makes it a popular choice for target and range loads. Always work up your loads using published data for your specific cartridge.
Will the bullets really weigh exactly 200 grains?
The 200 grain figure is based on Lee's suggested alloy. Your actual bullet weight can run a touch heavier or lighter depending on the lead alloy mix you cast with. It's worth weighing a few samples once you get going so you know what you're loading.
Why choose an aluminum mould over steel or iron?
Aluminum blocks heat and cool faster, so you're dropping good bullets after just a few casts instead of waiting on a cold mould. They also weigh about a third of what iron or steel blocks do, which cuts down on hand fatigue during long sessions, and they're rust resistant for easy storage.




Reviews
There are no reviews yet.