0
0

Lee Precision Quick Trim Die – 7mm Rem Mag Case Trimming Die Body

UPC: 734307902971

$12.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you reload 7mm Rem Mag, you already know the brass stretches and needs trimming after a few firings. The Lee Precision Quick Trim Die takes the measuring and fiddling out of that chore. It's a cartridge-specific die body cut to 7mm Remington Magnum specs that holds each case rock-steady while the cutter squares off the mouth. No calipers, no case length gauge, no back-and-forth adjusting. Screw it in, run your trimmer, and every piece comes out the same length.

How the 7mm Rem Mag Quick Trim Die Fits Your Setup

The die body is threaded 7/8"-14, so it drops into any press that takes standard reloading dies. It works hand in hand with the Lee Deluxe Quick Trim Case Trimmer, the Value Quick Trim, or the Deluxe Power Quick Trim, all of which are sold separately. The cutter assembly lives with the trimmer, not the die, so you only need one trimmer to cover every caliber in your lineup. Add a cartridge-specific die like this one and you're ready to trim that caliber.

Why Reloaders Reach for the Quick Trim System

The real draw here is speed paired with consistency. When the die is paired with a Deluxe or Power trimmer, the cutter trims to length while chamfering the inside and outside of the case mouth in a single pass, which trims your case-prep time down considerably. The system also squares the mouth, which helps with cleaner bullet seating down the road. Built from steel and designed to shrug off repeated use, this die body is the kind of simple, do-one-thing-well tool that earns a permanent spot on the bench.

Keep in mind you'll still need a shell holder and the trimmer itself to run it, but once you have the Quick Trim setup going, adding calibers is cheap and easy. For high-volume 7mm Rem Mag loaders, that's hard to beat.

Key Specifications

  • Manufacturer: Lee Precision
  • Cartridge: 7mm Remington Magnum
  • Product Type: Quick Trim Die Body
  • Die Series: Quick Trim
  • Thread: 7/8"-14 (standard reloading die thread)
  • Material: Steel (high carbon)
  • Dies Included: 1
  • Carbide: No
  • Compatibility: Lee Deluxe Quick Trim, Value Quick Trim, and Deluxe Power Quick Trim case trimmers (sold separately)
  • Manufacturer Part Number: 90297
  • UPC: 734307902971
  • Shipping Weight: 0.3 lb

What’s Included

  • Lee Precision 7mm Rem Mag Quick Trim Die body
  • Die locking ring (rifle dies)
  • Plastic die storage box
  • Instructions

Frequently Asked Questions

Does the 7mm Rem Mag Quick Trim Die come with a cutter or trimmer?

No, this is the cartridge-specific die body only. The cutter assembly comes with the Lee trimmer, whether that's the Deluxe Quick Trim, the Value Quick Trim, or the Deluxe Power Quick Trim. You'll need one of those trimmers plus a shell holder to actually trim your brass.

Will this Quick Trim Die work in my press?

If your press takes standard dies, yes. The die body is threaded 7/8"-14, which is the universal reloading die thread, so it screws into single stage, turret, and progressive presses that accept standard dies. You just thread it in like any other die.

Do I still need calipers to set the trim length?

Not for the die itself. The Quick Trim system is built so the cutter trims the 7mm Rem Mag brass to the correct length without measuring every case. If you're running a Deluxe or Power trimmer, it uses a click-adjustable stop for fine tuning in .001 inch increments if you want to trim a touch shorter.

Does this die chamfer the case mouth too?

The chamfering happens through the cutter, not the die body itself. When paired with the Deluxe or Deluxe Power Quick Trim, the cutter trims to length while chamfering the inside and outside of the case mouth in one motion. The die's job is to hold the case square so those cuts come out clean.

Additional information

UPC

734307902971

Manufacturer

Manufacturer Part Number

90297

Shipping Weight

0.3

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Quick Trim Die – 7mm Rem Mag Case Trimming Die Body”