Description
The Lee Precision TL358-148WC is a six-cavity aluminum bullet mold that casts a .358 diameter 148-grain wadcutter with the tumble lube groove design. The "TL" in the name tells you what sets it apart: instead of one or two deep grease grooves, the bullet carries several shallow micro bands that hold Lee Liquid Alox well. That means you cast, squirt on some lube, give them a shake in a tub, let them dry, and load. No lube-sizer press setup required to get started, which is why a lot of casters reach for the tumble lube design when they want to keep things simple and move fast.
What the TL358-148WC Casts
This one drops a flat-faced wadcutter sized for the classic 38-caliber family: 38 Special, 357 Magnum, 38 S&W, and 38 Colt New Police. Wadcutters are a target shooter's favorite because that full flat nose punches clean, easy-to-score holes in paper. The six-cavity block lets you pour six at a time, so once you get a rhythm going you can build up a serious stash of range bullets without babysitting a two-cavity mold all afternoon.
Why Casters Like the Lee TL358-148WC Aluminum Block
Lee machines these blocks from aluminum, which heats up and cools down quicker than iron or steel. In practice that means you're dropping good bullets after just a few throwaway casts, and the block won't rust on you between sessions. Aluminum also weighs about a third of what iron blocks do, so your hands and wrists hold up better during long casting runs. The cavities are CNC machined for consistent roundness and diameter.
Build Quality and Sprue Plate
The six-cavity molds are made for heavy-duty volume work. The blocks ride on steel bushings and alignment pins to keep the halves lined up cast after cast, and the hard-anodized sprue plate is cam operated and held down by spring washers at each end, so you're not pounding on it to cut the sprue. One tip straight from Lee: skip the spray-type mold releases, since they can build up in the cavity and shrink your bullet diameter. Smoking the cavities with a match or lighter is the way to go instead.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90294
- UPC: 734307902940
- Cavities: 6
- Bullet Diameter: .358 inch
- Bullet Weight: 148 grains
- Bullet Style: Tumble Lube Wadcutter (TL)
- Compatible Cartridges: 38 Special, 357 Magnum, 38 S&W, 38 Colt New Police
- Block Material: CNC machined aluminum
- Sprue Plate: Cam operated, hard anodized
- Alignment: Steel bushings and alignment pins
- Made In: USA
- Shipping Weight: 1.2188 lbs
What’s Included
- Lee TL358-148WC 6-cavity aluminum mold block
- Cam operated hard-anodized sprue plate
Frequently Asked Questions
Does the TL358-148WC mold come with handles?
No, the handles needed to open and close the block are sold separately. This mold uses the Lee six-cavity commercial mold handles, part number 90005. Plan on picking up a set if you don't already have one, since a six-cavity block needs those longer commercial handles to run.
What does the "TL" mean on the TL358-148WC?
TL stands for tumble lube, Lee's design that uses several shallow micro grooves instead of one or two deep grease grooves. Those grooves are made to hold Lee Liquid Alox, so you can lube a whole batch by tumbling them in a tub rather than running a lube-sizer. It's a fast, low-cost way to get cast bullets ready to load.
Which cartridges can I load with these 148-grain wadcutters?
The .358 diameter 148-grain wadcutter works for 38 Special, 357 Magnum, 38 S&W, and 38 Colt New Police. The flat-nose wadcutter profile is a longtime favorite for target and bullseye work because it cuts clean holes in paper. It's a great match for lighter-recoil practice and match loads.
Do I need to size bullets from this mold?
Many casters shoot Lee tumble lube bullets as cast, and Lee notes most bullets from their molds can be used without sizing. Results depend on your alloy, casting temperature, and how the bullet fits your barrel, so some shooters still run them through a push-through sizer. Also worth noting: skip spray mold releases, since Lee recommends smoking the cavities with a match or lighter instead to avoid shrinking bullet diameter.




Reviews
There are no reviews yet.