Description
The .500 S&W Magnum is one of the biggest handgun cartridges out there, and feeding it with factory ammo gets expensive fast. This Lee Precision 3-die set (part number 90288) gives you everything you need to start rolling your own, with a carbide sizing die that's the real star of the show. The carbide insert means you can skip the case lube and the mess that comes with it, which is a nice time-saver when you're working through a batch of these big cases.
What Sets the Lee .500 S&W Carbide Die Set Apart
Lee grinds its carbide insert to a special contour that sizes the case without leaving the harsh step or belt mark you'll find on ordinary carbide dies. After a case runs through the sizer, you'd be hard pressed to spot where the die stopped. The set runs standard 7/8-14 threads, so it'll thread right into any common single-stage or turret press you've already got on the bench.
How the Three Dies Work Together
You get a carbide full length sizing die with a decapping unit, a powder-through expanding die, and a bullet seating die. The expanding die does double duty by flaring the case mouth while you charge it with powder, and because it only flares the minimum amount needed, the seating die removes that flare cleanly. The bullet seating die gives you adjustable crimp, running anywhere from a slight taper all the way to a full roll crimp, which matters a lot with a heavy-recoiling round like the .500 where bullet pull is a real concern.
Getting Started with the Lee 90288 Die Set
Lee packs this set to get you going right out of the box. Keep in mind you'll want to pull your load data from a current reloading manual or a powder maker's website before you start charging cases. These dies are built to hold up for the high-volume reloader, so if you shoot the .500 regularly, this set will earn its keep over a lot of range trips.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90288
- UPC: 734307902889
- Caliber: .500 S&W Magnum
- Set Type: Carbide 3-Die Set
- Number of Dies: 3
- Sizing Die: Carbide Full Length with Decapping Unit
- Thread Size: 7/8-14
- Crimp Style: Adjustable, slight taper to full roll
- Case Lube Required: No
- Shell Holder: Included
- Also Fits: 500 Auto Max
What’s Included
- Carbide Full Length Sizing Die
- Powder-Through Expanding Die
- Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions and Load Data
Frequently Asked Questions
Do I need case lube with the Lee .500 S&W carbide die set?
No, the carbide sizing die is the whole point of going carbide. The hard carbide insert lets you size cases without any lube, and you don't even have to clean the cases first. That cuts out a messy, time-consuming step every reloading session.
Does this set include a separate crimp die?
It does not come with a dedicated factory crimp die. The bullet seating die handles crimping, and it's adjustable from a slight taper all the way to a full roll crimp. Many folks loading the hard-kicking .500 S&W add Lee's separate collet-style crimp die for an even heavier, more secure crimp, but that's an optional add-on.
Will this die set work in my press?
Yes, the dies use the standard 7/8-14 thread, so they fit single-stage and turret presses from Lee and most other major brands. The set also includes the correct universal shell holder, so you've got what you need to mount up and start loading.
Can I load 500 Auto Max with this .500 S&W die set?
Yes, Lee lists this set as working for both .500 S&W Magnum and 500 Auto Max. Always confirm your specific load data in a current reloading manual or on the powder manufacturer's site before charging any cases.





Reviews
There are no reviews yet.