Description
The Lee Classic Loader has been putting reloading in the hands of regular folks for decades, and this version is set up specifically for the .45-70 Government. It's a complete hand-loading kit that covers the whole process without a press, a bench, or a pile of accessories. You tap the components with a mallet, and in a few minutes you've turned a fired case back into a loaded round. For anyone who wants to try reloading without a big commitment, or for the lever-gun and single-shot crowd who likes to tinker with loads, this is about as straightforward as it gets.
What Comes in the .45-70 Classic Loader
The kit includes a bullet seater and priming chamber, a decapping chamber and decapper, a sizing die, a priming rod, a powder measure dipper, load data, full instructions, and a plastic storage case. Everything you need to load a single caliber is right there. The one thing it doesn't include is the rubber or plastic mallet you'll use to tap the pieces, and that part matters: a soft mallet is the right tool here, not a metal hammer.
How the Lee Loader Handles Your Brass
One thing worth understanding is that this kit neck sizes only, meaning it works best with brass that's already been fired in your rifle. That's usually a plus for accuracy, since the case stays fitted to your chamber instead of getting worked back down to full size every time. The loader parts are steel with a plastic powder dipper for measuring charges, and the system is built to deliver consistent, repeatable results one round at a time.
Who Gets the Most Out of the Classic Loader
This isn't a high-volume setup, and it was never meant to be. A reasonable pace is around 50 rounds an hour, which is perfect for topping off your supply or dialing in a load you like. Toss it in a pack and you can reload at camp, at the range, or at the kitchen table. For the thumper that is the .45-70, where factory ammo can get pricey and hard to find, rolling your own is a satisfying way to keep the old girl fed.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90264
- UPC: 734307902643
- Caliber: .45-70 Government
- Product Type: Lee Loader Rifle Kit
- Series: Classic
- Sizing Type: Neck sizes only
- Shell Holder: Included
- Material: Steel loader parts with plastic powder dipper
- Country of Origin: United States
- Length: 5.95 in
- Shipping Weight: 1.11 lbs
What’s Included
- Bullet seater and priming chamber
- Decapping chamber
- Decapper
- Sizing die
- Priming rod
- Powder measure (dipper)
- Load data
- Complete instructions
- Plastic storage case
Frequently Asked Questions
Does the Lee Classic Loader .45-70 come with a mallet?
No, the mallet is not included in the kit. You tap the components with your own rubber or plastic mallet to size, prime, and seat. Stick with a soft-faced mallet and avoid a metal hammer, which can damage the parts.
Does this kit full-length resize .45-70 brass?
It does not. The Classic Loader neck sizes only, so it works best with cases already fired in your rifle. Because the brass stays fitted to your chamber, a lot of folks find this helps accuracy for a single-rifle setup.
How many rounds can I load per hour with the .45-70 Lee Loader?
This is a low-volume, one-at-a-time tool rather than a progressive press. A comfortable pace is roughly 50 rounds an hour, which is plenty for topping off your supply or working up a load. If you're loading in big batches, a press is the better choice.
Do I need a reloading bench to use the Classic Loader?
No bench required, which is one of the best things about it. The whole kit is compact enough to fit in a range bag and use on a sturdy surface at camp, the range, or the kitchen table. It comes with a plastic storage case to keep the pieces together.





Reviews
There are no reviews yet.