Description
If you shoot a Makarov PM, CZ-82, or any other 9x18mm pistol, you already know factory ammo can be scarce and the surplus stuff is drying up. Rolling your own is the smart fix, and this Lee Carbide 3-Die Set gives you everything the handloading side needs to turn once-fired brass into reliable range fodder. It's built specifically for the 9x18mm cartridge, so don't confuse it with 9mm Luger or Parabellum dies. They are not interchangeable.
The heart of the set is the carbide full-length sizing die. Because the sizing ring is tungsten carbide, you skip the case lube step entirely, which saves you a messy extra chore and a cleanup afterward. The powder-through expanding die handles two jobs at once: it opens up and bells the case mouth while letting you drop your charge through the same die using a dipper or a Lee auto disk measure. The bullet seating die rounds things out with a built-in crimp that adjusts from a slight taper all the way to a full roll, so you can dial in exactly what your loads want.
What You Get With the Lee 9mm Makarov Die Set
Along with the three dies, Lee throws in a universal shell holder, a powder dipper, and a load data sheet with instructions, all tucked into a fitted storage box. The dies use the standard 7/8"-14 thread, so they'll thread right into any common single stage, turret, or progressive press without adapters.
Getting the Most From This 9x18mm Carbide Set
Since the seating die crimps and seats in the same motion, it pays to keep your brass consistent and your bullet diameter in check for the cleanest results. Lee builds these dies to tight tolerances, and with the carbide sizing ring doing the heavy lifting, this is a set that'll keep cranking out accurate 9x18mm ammo for years. For folks who want to keep an old Cold War surplus pistol fed without hunting down ammo, it's a solid, no-nonsense way to do it.
Key Specifications
- Caliber: 9mm Makarov (9x18mm)
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90176
- UPC: 734307901769
- Number of Dies: 3
- Die Set Type: Carbide Pistol Die Set
- Sizing Die Material: Tungsten Carbide
- Case Lube Required: No
- Die Thread: 7/8"-14
- Crimp Type: Adjustable, slight taper to full roll
- Shell Holder Included: Yes (Universal)
- Gun Type: Pistol
- Country of Origin: United States
What’s Included
- Carbide full-length sizing die with decapping unit
- Powder-through expanding die
- Bullet seating die with built-in crimp
- Universal shell holder
- Powder dipper
- Instructions and load data sheet
- Fitted storage box
Frequently Asked Questions
Do I need case lube with the Lee 9mm Makarov carbide die set?
No. The sizing die uses a tungsten carbide ring, so you can size your 9x18mm brass without any lubricant. That saves you the extra step of applying and then cleaning lube off your cases, which is one of the big reasons folks prefer carbide dies for straight-walled pistol rounds.
Will these dies work for 9mm Luger or 9mm Parabellum?
No, they will not. This set is built specifically for the 9x18mm Makarov cartridge, which is a different diameter and length than 9mm Luger, 9mm Parabellum, or 9x21mm. Using the wrong caliber dies will not produce usable ammunition, so make sure your brass is genuine 9x18mm Makarov.
What press do I need to use this Lee 3-die set?
The dies use the common 7/8"-14 thread, so they'll fit just about any standard reloading press, whether that's a single stage, turret, or progressive. You will need the press itself, plus a powder measure or the included dipper, since those aren't part of the die set.
How does the crimp work on the seating die?
The bullet seating die has a built-in crimp that adjusts from a slight taper all the way to a full roll crimp. Seating and crimping happen in the same stroke, so it helps to keep your brass trimmed consistently and your bullet diameter in check for the cleanest, most uniform results.




Reviews
There are no reviews yet.