Description
If you shoot enough .357 Magnum to be reloading your own, you already know case trimming is the chore nobody looks forward to. The Lee Precision Quick Trim Die in .357 Magnum takes a lot of the hassle out of it. The die holds your brass securely and square while the cutter does the work, so your case mouths come out clean and even every time. It threads in at the standard 7/8-14, which means it drops right into any press that accepts common reloading dies.
What makes this system click is how it removes the guesswork. There's no reaching for calipers between cases, no trial-and-error adjustment, and no measuring each piece of brass. You set it up once, and the die references the case against a fixed stop so every round gets trimmed to the same length. On top of trimming, it chamfers both the inside and outside of the case mouth in the same pass, which saves you a separate deburring step down the line.
How the .357 Magnum Quick Trim Die Fits Into Your Setup
This is the die body only. To put it to work you'll want to pair it with either the Lee Deluxe Quick Trim Case Trimmer or the Value Trim Case Trimmer, both sold separately. The cutter drops into the top of the die once it's installed in your press, and from there it's just a matter of running your brass through. Reloaders who've used it tend to mention how consistent the finished length comes out, and a drop of oil on the cutter shaft keeps things turning smooth.
Built for .357 Magnum Brass
Machined from steel and made in the USA, this die is caliber-specific to .357 Magnum, so it indexes off that case for a proper, repeatable cut. Keep in mind that handgun Quick Trim dies don't ship with a lock ring since they don't need one, and a shell holder is required but not included. It's a simple, well-made tool that earns its spot on the bench for anyone who reloads this round in any kind of volume.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90088
- UPC: 734307900885
- Caliber: .357 Magnum
- Product Type: Case Trim Die
- Die Series: Quick Trim
- Thread Size: 7/8-14
- Material: Steel
- Country of Origin: United States
- Shell Holder Required: Yes (not included)
- Lock Ring Included: No (not needed for handgun dies)
- Quantity: 1 die
What’s Included
- Lee Precision .357 Magnum Quick Trim Die
- Plastic die storage box
Frequently Asked Questions
Does the .357 Magnum Quick Trim Die come with the cutter I need to trim brass?
No, this is the die body only. You'll need to pair it with either the Lee Deluxe Quick Trim Case Trimmer or the Lee Value Trim Case Trimmer, both sold separately. The cutter inserts into the top of the die once it's installed in your press.
Will this die fit my reloading press?
Yes, it uses the standard 7/8-14 thread, so it works in any press that accepts common reloading dies. It drops right in just like your sizing or seating dies do.
Do I need calipers to trim my .357 Magnum cases with this?
No calipers or manual measuring are required. The die references each case against a fixed stop, so once it's set up, every piece of brass trims to the same length automatically. It also chamfers the inside and outside of the case mouth in the same pass.
Is a shell holder included with the .357 Magnum Quick Trim Die?
A shell holder is required to use the die, but it is not included in the package. Handgun Quick Trim dies also do not come with a lock ring, since one isn't needed for this type of die.




Reviews
There are no reviews yet.