0
0

Lee Precision #4 Buckshot 18-Cavity Mold (.240″ / 90028)

UPC: 734307900281

$56.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever gone looking for #4 buckshot and come up empty at the counter, this mold is how you take matters into your own hands. The Lee Precision #4 Buckshot mold is a precision-machined 18-cavity block that drops 18 linked pellets every time you pour, each one running about .240 inches in diameter and roughly 21 grains. Instead of counting out individual pellets, you simply snip three strands and drop them straight into a 12 gauge hull. One cast gives you enough shot for two full shotshells.

What Makes the Lee #4 Buckshot Mold Worth Having

The mold blocks are machined from aluminum, which is a big deal once you've spent an afternoon at the lead pot. Aluminum heats up and cools down faster than iron or steel, and it comes in at roughly a third of the weight, so your arm isn't fried halfway through a casting session. The cavity halves are clamped and lathe-bored for tight, consistent roundness, so the pellets come out uniform pour after pour. Once the mold is up to temperature, it moves quick, capable of turning out around 3,000 pellets an hour.

Getting Good Results With the #4 Buckshot Mold

Like any Lee aluminum mold, the trick is heat. Keep your alloy good and hot and let the mold come up to temperature before you expect clean, fully formed pellets. The first few pours while it's warming up might not be perfect, but once it's dialed in you'll be rolling out complete, round buckshot with very little fuss. For home defense loads or just keeping a hard-to-find size on hand, casting your own #4 buck is a satisfying way to stretch your lead supply.

A Note Before You Order the Lee 90028

The handles you see in the product photos are not included with the mold itself. You'll want to pair it with Lee's mold handles, part #90005, to open and close the block during casting. Grab a set along with this if you don't already have a compatible pair on your bench.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90028
  • UPC: 734307900281
  • Product Type: Buckshot Mold
  • Shot Size: #4 Buckshot
  • Pellet Diameter: 0.240 in
  • Pellet Weight: Approx. 21 Grain
  • Cavities: 18 (linked pellets per cast)
  • Load Capacity Per Cast: Two 12 Gauge shotshells
  • Casting Rate: Up to approx. 3,000 pellets per hour
  • Block Material: Aluminum
  • Weight: Approx. 1.18 lbs
  • Quantity: 1 Mold

What’s Included

  • Lee Precision #4 Buckshot 18-cavity mold block (handles not included, order part #90005 separately)

Frequently Asked Questions

Does the Lee #4 Buckshot mold come with handles?

No, the handles shown in the product photos are not included with the mold itself. You'll need Lee's mold handles, part #90005, to open and close the block while casting. If you don't already have a compatible pair on your bench, grab a set to go with this mold.

What size and weight pellets does the 90028 mold produce?

This mold drops #4 buckshot at approximately 0.240 inches in diameter, with each pellet weighing right around 21 grains. It casts 18 linked pellets in a single pour. Keep in mind the exact weight can shift slightly depending on the alloy mix you're using.

How many shotshells can I load from one cast?

Each cast produces 18 linked pellets, which is enough to load two 12 gauge shotshells. Rather than counting pellets one at a time, you just snip three strands and drop them into the hull. Once the mold is up to temperature it moves fast, so stocking up goes quickly.

Why is the mold made of aluminum instead of steel?

Aluminum blocks heat up and cool down faster than iron or steel, which speeds up your casting sessions. They also weigh about a third as much, so your hands and arms stay fresher over a long day at the pot. The cavities are lathe-bored for consistent, round pellets pour after pour.

Additional information

UPC

734307900281

Manufacturer

Manufacturer Part Number

90028

Caliber/Gauge

Buckshot

Capacity

2 Bullets

Grains

21 Grain

Product Type

Mold

Quantity

1

Reviews

There are no reviews yet.

Be the first to review “Lee Precision #4 Buckshot 18-Cavity Mold (.240″ / 90028)”