$50.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Barnes TSX in .308 diameter, 180 grain, is the bullet a lot of handloaders reach for when they want dependable terminal performance on big game. It's a 100% copper projectile with a boat tail base and an open hollow point tip, carrying a G1 ballistic coefficient of 0.453 and a sectional density of 0.271. With no lead core to separate, the TSX holds together through bone and heavy muscle and routinely retains close to all of its original weight, which is a big part of why it has such a loyal following among elk, moose, and plains game hunters.
On impact the nose peels back into four razor-sharp copper petals, opening a wide wound channel while the solid shank keeps driving forward. Because there's no jacket and core to come apart, you get deep, straight-line penetration and reliable expansion across a range of velocities. The all-copper build also means minimal fragmentation, so you keep more of the energy working where it counts.
The shank has multiple engineered grooves cut into it that act as relief points as the bullet travels down the bore. That design reduces pressure on hot loads and cuts way down on copper fouling, so your barrel stays cleaner over a long range session. Keep in mind copper bullets run a touch longer than lead-core bullets of the same weight, so you'll want to confirm your overall length works through your magazine and chamber.
Barnes recommends starting around .050 inch off the lands and adjusting from there, since these bullets tend to shoot their best with a little jump. Plenty of reloaders find their sweet spot anywhere from .030 to .070 off, and some rifles prefer closer. It's worth spending a few rounds on seating depth testing because when a TSX load comes together, it shoots tight and hits hard. Each box holds 50 bullets, giving you plenty to work up a load and still have hunting ammo ready.
This 180-grain TSX is a strong pick for medium to large game like deer, elk, moose, and bigger plains game. The all-copper construction holds together and penetrates deep, so it performs well on heavy bone and thick muscle. Hunters consistently report near-total weight retention and one-shot results across a wide range of distances.
Barnes recommends starting at about .050 inch off the lands and working from there, since these bullets usually shoot best with some jump. Many reloaders find their best groups anywhere from .030 to .070 off the lands, though some rifles prefer closer. The grooves on the shank are for pressure and fouling relief, so don't use them to set your seating depth.
Yes, the TSX is 100% copper with no lead core. That solid construction is what gives it such consistent weight retention and deep penetration. It's also a common choice for areas or ranges where non-lead projectiles are preferred.
The TSX is designed to reduce copper fouling, not increase it. The engineered grooves cut into the shank act as relief valves as the bullet moves down the bore, which lowers pressure on hot loads and keeps fouling to a minimum. Many reloaders find their barrels stay noticeably cleaner compared to older all-copper designs.
| UPC | 716876308460 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 30353 |
| Bullet Caliber | .30 Caliber |
| Caliber/Gauge | .30 Caliber |
| Grains | 180 |
| Model | |
| Product Type | Hollow Point |
| Quantity | 50 Per Box |
| Shipping Weight | 1.4 |
| Units per Box | 50 |
You must be logged in to post a review.
Reviews
There are no reviews yet.