Description
Berry's Superior Plated Bullets have earned their spot as a go-to projectile for high-volume pistol reloaders, and this .401" diameter, 180-grain Round Shoulder load is a workhorse for .40 S&W and 10mm. Each bullet starts as a swaged lead core that gets tumbled in an electrically charged copper bath, so the plating bonds evenly to the core. After plating, the bullets go back into a carbide die and get re-struck to final dimension, which is the step that keeps weight and size dialed in from the first round to the last.
What Makes These Berry's .40 Cal Bullets Worth Loading
The copper plating does a couple of nice things at the bench and at the range. It runs cleaner than bare cast lead, so you spend less time scrubbing a leaded-up bore, and it costs less than fully jacketed projectiles, which matters when you are feeding a .40 by the thousand. The Round Shoulder profile is essentially Berry's take on a round nose flat point, giving you reliable feeding through semi-auto magazines along with a flat enough meplat to punch clean holes in paper.
Load Data for the 180 gr Round Shoulder
Berry's lists a bullet overall length of .575" for this projectile. For .40 S&W, the cartridge OAL comes in around 1.125" to 1.135", and 10mm runs out to roughly 1.250" to 1.260". These plated bullets follow a pressure curve close to hard cast, so a good starting point is published cast or jacketed data at the same grain weight and profile. Keep them under about 1,250 fps and you will get the accuracy and barrel-friendly behavior plated bullets are known for.
This package holds 1,000 loose-packed bullets, enough to keep your range sessions and load development going for a while without a reorder. For target practice, steel plates, and general plinking in .40 S&W or 10mm, this is a dependable, budget-minded projectile that keeps your brass full and your groups tight.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Manufacturer Part Number: 09911
- UPC: 711148099114
- Caliber: .40 S&W / 10mm
- Bullet Diameter: .401"
- Bullet Weight: 180 grain
- Bullet Type: Round Shoulder (RS) Flat Point
- Construction: Copper Plated, Swaged Lead Core
- Core Material: Lead
- Bullet OAL: .575"
- Max Velocity: 1,250 fps
- Quantity: 1,000 (loose packed)
- Shipping Weight: 26.0625 lbs
What’s Included
- 1,000 Berry's Superior Plated .40 cal/10mm 180 gr Round Shoulder Flat Point bullets (loose packed)
Frequently Asked Questions
Will these Berry's 180 gr bullets work in both .40 S&W and 10mm?
Yes. At .401" diameter and 180 grains, they are made for both .40 S&W and 10mm. Just use the correct cartridge overall length and load data for whichever caliber you are building, since the two run at different pressures and OALs.
What load data should I use for these plated bullets?
Berry's recommends treating their plated bullets like hard cast, so start with published cast or jacketed data at the same 180-grain weight and similar profile. Berry's lists a bullet OAL of .575" as a reference. Always begin at a starting charge and work up while watching for pressure signs.
What does Round Shoulder mean on these bullets?
Round Shoulder is Berry's term for a profile that is essentially a round nose flat point. The rounded ogive helps the bullet feed smoothly through semi-auto magazines, while the flat tip still cuts a clean hole in paper for easy scoring.
How fast can I push these plated bullets?
Keep them under roughly 1,250 fps for best results. Plated bullets have a thin copper layer rather than a thick jacket, so running them too hot can affect the plating and accuracy. Staying within that range keeps them shooting clean and consistent.





Reviews
There are no reviews yet.