Description
The Jebs Head Hunter is one of those chokes that changes how you think about your turkey gun. This one drops right into 12 gauge shotguns running the Browning Invector Plus threading, with a tight .660 constriction that squeezes your pattern down to a dense, deadly core out at distances most factory chokes can't touch. It wears a matte stainless finish, so it holds up to weather and hard hunting without shining back at a bird's sharp eyes.
What Makes the Head Hunter Pattern So Tight
The magic is in Jebs' patented multi-staged interior bore. Instead of a simple taper, the internal design works to cleanly separate the shot from the wad cup as the payload leaves the barrel. That clean separation keeps pellets flying straight and stacking on top of each other downrange, which is exactly what you want when a longbeard hangs up at 40, 50, or more yards. Hunters running these chokes regularly report full, even patterns holding together well past what they expected, with clean kills reported out into the 60-plus yard range with the right shell.
Porting That Earns Its Keep
This is a ported choke, and the ports do real work. Gas gets vented before the shot exits, which helps tame muzzle jump and knocks down some of the felt recoil that heavy turkey loads dish out. That's a welcome thing when you're touching off a 3-inch magnum from an awkward sitting position against a tree.
Dialing In Your Turkey Setup
The Head Hunter is built to reward patterning at the range. It plays especially well with premium tungsten and TSS turkey loads, letting those small, dense pellets do their thing through a choke designed to hold them tight. As with most aftermarket turkey chokes, avoid running steel shot through it. Take it to the patterning board, try a few different shells, and find the load your gun loves. Proudly made in the USA, this is the kind of tube that earns a permanent spot in your Invector Plus gun.
Key Specifications
- Manufacturer: Jebs Choke Tubes
- Model: Head Hunter
- Manufacturer Part Number: JPC-12B1/660
- UPC: 643906923396
- Gauge: 12 Gauge
- Constriction Diameter: .660
- Configuration: Browning Invector Plus
- Constriction Type: Turkey
- Style: Ported
- Finish: Matte Stainless
- Chokes Included: 1
- Country of Origin: USA
- Shipping Weight: 0.22 lb
What’s Included
- One Jebs Head Hunter ported turkey choke tube (12 ga, .660, Browning Invector Plus)
Frequently Asked Questions
Will the Head Hunter fit my shotgun?
This specific choke is threaded for the Browning Invector Plus system in 12 gauge. That covers many Browning and Winchester shotguns that use Invector Plus threading. If you're unsure what your gun takes, check your barrel or owner's manual before ordering, since Jebs makes the Head Hunter in several different threads and constrictions.
What loads work best through the .660 Head Hunter?
This tight .660 constriction really shines with premium tungsten and TSS turkey loads, which pattern extremely dense through it. Many hunters run smaller shot sizes like 7.5 or 9 in TSS to take advantage of the tight core. Steel shot should not be run through this choke, so stick with lead or tungsten-based turkey loads.
Does the porting actually reduce recoil?
Yes. The ports vent gas before the shot leaves the muzzle, which helps cut down muzzle rise and takes some of the sting out of heavy magnum turkey loads. It won't turn a 3-inch magnum into a .22, but the difference is noticeable when you're shooting from a braced hunting position.
How far can I effectively shoot with this choke?
That depends on your gun, your load, and your patterning results, but the Head Hunter is built to extend your effective range well beyond a standard choke. Hunters report clean, dense patterns holding together out past 50 and even 60 yards with quality TSS loads. Always confirm your own effective range on the patterning board before heading to the woods.




Reviews
There are no reviews yet.