Description
If you've been chasing a cleaner, more uniform roll crimp on your revolver loads, this is the tool Redding built for exactly that job. The Profile Crimp Die is a dedicated crimping die, meaning it does one thing and does it well. You seat your bullets to the correct depth in a separate step first, then run the loaded round through this die to apply a tight, consistent roll crimp. That separation of jobs is what lets it put down a cleaner crimp than you'd typically get from a combined seat-and-crimp operation.
What the Redding Profile Crimp Die Was Built to Fix
This design actually came out of the silhouette shooting world. Reloaders were fighting the ugly half-moon crimp that shows up so often on magnum handgun cartridges, and Redding's answer not only cleaned that up but tightened groups in the process. For anyone loading heavy .357 Magnum rounds that need to stay put under recoil, that uniform crimp means better bullet retention and more consistent ignition from shot to shot.
Fitting the .38 Special/.357 Mag Crimp Die to Your Setup
This die (part number 86282) threads into any standard 7/8-14 press, so it drops right into single stage and turret presses without any fuss. It handles both .38 Special and .357 Magnum brass since they share the same case diameter. Keep in mind this is a roll crimp die made for rimmed revolver cartridges that headspace on the rim, not a taper crimp die for semi-auto rounds that headspace on the case mouth. If you're loading for a wheelgun, that rim-headspacing design is exactly what you want.
Redding Quality You Can Count On
Redding has a long reputation among handloaders for tight tolerances and tools that just work, year after year. This crimp die is a popular add-on for folks who already run a three-die set but want to break out the crimp into its own stage for better control. It's a straightforward upgrade that pays off in cleaner finished rounds and more confidence at the range.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 86282
- UPC: 611760862823
- Caliber: .38 Special / .357 Magnum
- Die Type: Profile Crimp Die (roll crimp)
- Crimp Style: Roll-type crimp for rimmed cases
- Series: Series A
- Thread: 7/8-14 standard
- Material: Steel
- Standard Shellholder: #12
- Country of Origin: United States
- Quantity: 1 die
- Shipping Weight: 0.4688 lb
What’s Included
- Redding Profile Crimp Die .38 Special/.357 Mag (one die)
Frequently Asked Questions
What does the Redding Profile Crimp Die actually do?
It applies a tight, uniform roll-type crimp to your loaded .38 Special and .357 Magnum rounds. You seat the bullet to the correct depth in a separate step first, then run the round through this die to add the crimp. Separating the crimp into its own stage gives you cleaner, more consistent results than crimping and seating at the same time.
Can I use the Profile Crimp Die for both .38 Special and .357 Magnum?
Yes. The 86282 handles both cartridges since they share the same case diameter. It's one of the handiest reasons this die is popular with revolver shooters loading both rounds.
Will this crimp die fit my press?
It uses the standard 7/8-14 thread, so it threads right into common single stage and turret presses. You'll want the #12 shellholder to run .38 Special and .357 Magnum brass. Just remember this is a dedicated crimp die, not a seater, so it works alongside your seating die rather than replacing it.
Is this a roll crimp or a taper crimp die?
This is a roll crimp die, which is exactly what you want for rimmed revolver cartridges like .38 Special and .357 Magnum that headspace on the rim. It is not a taper crimp die, so it isn't intended for cartridges that headspace on the case mouth. For wheelgun loads, the roll crimp locks the bullet in place and helps it stay put under recoil.





Reviews
There are no reviews yet.