0
0

Redding Neck Die Set .24 Nosler – 2-Die Reloading Set 82320

UPC: 611760823206

$71.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Neck Die Set in .24 Nosler is a focused two-die package aimed at handloaders who want precision brass prep for this little 6mm AR-class round. Redding was first out of the gate making dies for the .24 Nosler, and this set reflects the kind of fit and finish the company has built its name on over the decades.

What the .24 Nosler Neck Die Set Does

This set includes two dies. The Neck Sizing Die comes assembled with a decapping rod and a neck sizing button, so it deprimes and resizes the case neck in one pull while leaving the body and shoulder in their fire-formed state. The conventional Seating Die rounds out the set with a bullet guide, a built-in crimp ring, and the proper seating plug for consistent seating depth. Because neck sizing only works the neck and not the full case body, you put less stress on your brass, which can mean more firings before trimming becomes a chore. That makes it a favorite approach for bolt-action and single-shot rifles running a dedicated batch of brass fired through the same chamber.

Build Quality Behind the Redding .24 Nosler Dies

Redding machines its dies on precision lathes capable of holding tight tolerances, then heat treats them in atmospherically controlled furnaces so they hold up over years of use. The dies use the standard 7/8-14 thread, so they drop right into common single-stage and turret presses. Since the .24 Nosler shares its rim diameter with the .223 Remington, a #10 shellholder gets you squared away.

Room to Grow Your Setup

One of the nice things about this set is how it plays with Redding's wider lineup. A carbide size button kit is available separately for the neck sizing die, which smooths the draw of the expander back through the neck and cuts down on case stretch. Bullet seating micrometers are also offered for most conventional seating dies, covering both standard and VLD-style bullets, so you can dial in seating depth with repeatable precision when you're ready to take things further.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 82320
  • UPC: 611760823206
  • Caliber: .24 Nosler
  • Type: Neck Die Set (2-Die)
  • Dies Included: Neck Sizing Die, Conventional Bullet Seating Die
  • Die Thread: 7/8-14
  • Recommended Shellholder: #10
  • Material: Heat-treated steel
  • Country of Origin: USA
  • Shipping Weight: 1.19 lbs

What’s Included

  • Neck Sizing Die with decapping rod assembly and neck sizing button
  • Conventional Bullet Seating Die with bullet guide, built-in crimp ring, and seating plug

Frequently Asked Questions

What is the difference between this Redding Neck Die Set and a full-length die set for the .24 Nosler?

A neck sizing die only resizes the case neck and leaves the body and shoulder in their fire-formed condition, while a full-length die works the entire case back to spec. Neck sizing works the brass less, which can stretch out case life and reduce how often you trim. It is best suited for bolt-action and single-shot rifles using brass fired from the same chamber.

Does the Redding Neck Die Set .24 Nosler decap the case?

Yes. The Neck Sizing Die comes assembled with a decapping rod, so it removes the spent primer and resizes the neck in a single stroke. That means you don't need a separate decapping die for your routine.

Will these dies fit my press and what shellholder do I need?

The dies use the standard 7/8-14 thread, so they fit common single-stage and turret presses. Since the .24 Nosler shares the same rim diameter as the .223 Remington, a #10 shellholder works for this cartridge.

Can I upgrade the Redding .24 Nosler neck die set later?

Yes. Redding offers a carbide size button kit separately for the neck sizing die to ease expander draw and reduce case stretch. Bullet seating micrometers are also available for most conventional seating dies to handle both standard and VLD-style bullets when you want finer seating depth control.

Additional information

UPC

611760823206

Manufacturer

Manufacturer Part Number

82320

Shipping Weight

1.19

Reviews

There are no reviews yet.

Be the first to review “Redding Neck Die Set .24 Nosler – 2-Die Reloading Set 82320”