0
0

Redding Type S Neck Die Set 22 ARC | 3-Die Bushing Set 78963

UPC: 611760789632

$183.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 22 ARC and chasing tighter groups, neck tension is one of the biggest levers you can pull. The Redding Type S Neck Die Set gives you real control over that part of the process. Instead of being locked into one fixed neck diameter, the bushing-style design lets you swap bushings in .001 inch steps to get the exact grip on your bullets that your rifle and brass like best. That kind of tuning is what separates plinking ammo from loads that stack shots on top of each other.

What the Redding Type S 22 ARC Set Brings to the Bench

This is a three-die set built around a Type S bushing neck sizing die, a body die, and a standard bullet seating die. The neck die uses interchangeable bushings that self-center on the case neck, which helps keep runout low and concentricity high. There's an adjustable decapping rod too, so you can position the bushing to size only part of the neck length if you'd rather not touch the whole thing. The body die handles the case body and bumps the shoulder back for smooth chambering without disturbing your necks, which is handy once brass starts getting a little tight after repeated firings.

Tuning Neck Tension With the Type S Neck Die

The real appeal here is flexibility. The decapping rod comes with a standard size button, and a decapping pin retainer is included so you can run the die without the button if you turn or sort necks for uniformity. That setup rewards folks who like to experiment and find the sweet spot for their 22 ARC loads. Keep in mind the neck sizing bushings and the shellholder are sold separately, so you'll want to grab the right bushing size for your brass and a #12 shellholder before your first session.

The dies are built from hardened steel and come packed in a plastic storage case to keep everything together between loading sessions. For anyone who takes their 22 ARC seriously, whether that's precision range work or careful hunting loads, this set covers the core steps of case prep with the kind of quality Redding is known for.

Key Specifications

  • Manufacturer: Redding
  • Caliber: 22 ARC (Advanced Rifle Cartridge)
  • Die Type: Type S Bushing Neck Sizing
  • Set Configuration: 3-Die Set
  • Bullet Diameter: 0.224 in
  • Material: Hardened Steel
  • Thread Size: 7/8-14
  • Recommended Shellholder: #12 (sold separately)
  • Bushing Range: .241 to .251 (sold separately)
  • Manufacturer Part Number: 78963
  • UPC: 611760789632
  • Shipping Weight: 1.513 lbs

What’s Included

  • Type S Bushing Neck Sizing Die with adjustable decapping rod
  • Body Die
  • Standard Bullet Seating Die
  • Standard size button
  • Decapping pin retainer
  • Plastic storage case

Frequently Asked Questions

Does the Redding Type S Neck Die Set 22 ARC come with bushings?

No, the neck sizing bushings are sold separately. The bushing-style design is what lets you fine-tune neck tension, and Redding offers them in .001 inch increments so you can match your exact brass and load. For 22 ARC the common bushing range runs from about .241 to .251, so measure a loaded round neck and order accordingly.

What shellholder do I need for the 22 ARC Type S set?

The 22 ARC uses a #12 shellholder, which is not included with the die set. You'll need to pick one up separately before you start sizing. Redding and most other brands make a compatible #12.

What's the difference between this Type S Neck Die Set and the Match version?

This standard Type S Neck Die Set includes a bushing neck sizing die, a body die, and a conventional bullet seating die. The Match version swaps that conventional seater for a Competition seating die with a micrometer adjustment. If you want micrometer-adjustable seating depth, you'd want the Match set instead.

Can I size only part of the case neck with this die?

Yes. The adjustable decapping rod lets you position the bushing to resize only a portion of the neck length if you prefer. This is a popular approach for reloaders who want to leave a section of the neck unsized for better alignment and consistency.

Additional information

UPC

611760789632

Manufacturer

Manufacturer Part Number

78963

Shipping Weight

1.513

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Neck Die Set 22 ARC | 3-Die Bushing Set 78963”