0
0

Redding .290 Titanium Nitride Neck Sizing Bushing (76290)

UPC: 611760762901

$34.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're serious about getting the bullet grip just right on your handloads, a bushing like this .290 Redding is how you take control. Instead of over-working the case neck the way a standard full-length die can, a bushing lets you size the neck down to a precise diameter so you're holding the bullet with exactly the tension you want. This one measures .290 inches and carries the titanium nitride treatment that reloaders reach for when they want a smoother stroke.

What the .290 Redding Bushing Does at the Bench

These bushings start as heat treated steel with a surface hardness in the Rc 60-62 range, then get a titanium nitride coating layered on top. That TiN surface bumps up the hardness even further and cuts down friction during the sizing operation, so brass slides through easier and the bushing itself holds up over a long reloading life. The payoff is cleaner, more consistent neck tension and less working of the brass, which stretches out how many times you can reload a case before it wears out.

Picking the Right Redding TiN Neck Sizing Bushing

Sizing a neck bushing is simple once you know the trick. Measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001 to .002 inches to account for brass springback and proper bullet grip. That number is the bushing you want. Redding builds these in .001 inch increments across a wide range from roughly .185 up through .368, covering calibers from .17 all the way to .338, so there's a bushing to match nearly any cartridge you're loading.

Fit and Compatibility

This bushing shares the standard external footprint of half-inch outside diameter by three-eighths inch long, and it drops right into Redding bushing-style neck sizing dies. It's also a common fit for other popular bushing-style die systems, so you aren't locked into one brand. Keep in mind the die and shellholder are sold separately, so this is the component you add once your bushing die is already set up. For anyone chasing tighter groups and longer brass life, it's a small part that makes a real difference.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76290
  • UPC: 611760762901
  • Bushing Diameter: .290 inch
  • Material: Heat treated steel with Titanium Nitride (TiN) coating
  • Surface Hardness: Rc 60-62
  • External Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Type: Neck sizing bushing
  • Compatibility: Redding bushing-style neck sizing dies and other popular bushing-style dies
  • Quantity: 1 bushing
  • Country of Origin: United States

What’s Included

  • One Redding .290 Titanium Nitride neck sizing bushing

Frequently Asked Questions

How do I know if the .290 Redding bushing is the right size for my cartridge?

Measure the outside neck diameter of a loaded round with a precision micrometer, then subtract .001 to .002 inches to allow for brass springback and bullet tension. If that number lands on .290, this is your bushing. Redding offers these in .001 inch increments, so you can fine-tune neck tension to your exact load.

Will this Redding TiN bushing work in dies other than Redding?

Yes. It uses the standard half-inch O.D. by three-eighths inch long external dimensions and freely interchanges in all Redding bushing-style neck sizing dies. It's also a common fit for other popular bushing-style die systems, so you aren't tied to a single brand.

What's the advantage of the titanium nitride version over the plain steel bushing?

Both styles start as heat treated steel hand polished to an Rc 60-62 surface hardness. The titanium nitride coating adds even greater surface hardness and reduces friction during sizing, which means a smoother sizing stroke and easier handling on your brass.

Does this bushing come with a die or shellholder?

No, this is the bushing on its own. The bushing-style sizing die and the shellholder are sold separately, so you'll want to already have a compatible bushing die set up to drop this into.

Additional information

UPC

611760762901

Manufacturer

Manufacturer Part Number

76290

Shipping Weight

0.0188

Reviews

There are no reviews yet.

Be the first to review “Redding .290 Titanium Nitride Neck Sizing Bushing (76290)”