Description
If you are running a bushing-style neck sizing die and want real control over your neck tension, the Redding .261 Titanium Nitride bushing is the piece that makes it happen. This is the TiN version of Redding's neck sizing bushings, built from heat treated steel and then coated in titanium nitride for added lubricity. That coating cuts down on sizing friction, so the bushing glides over the case neck a little easier and takes some of the drag out of the stroke.
The bushing measures 1/2 inch outside diameter by 3/8 inch long, which is the standard Redding external size. It drops right into all Redding Bushing Style dies and also interchanges with Wilson-style bushings, plus it plays nicely with most popular brands of bushing dies out there. The sizing surface itself is hardened to roughly Rc 60-62 and hand polished, so you get consistent, repeatable neck tension pass after pass. The .261 size is clearly marked on the bushing so you are never guessing which one you grabbed out of the box.
Dialing In Neck Tension With the .261 TiN Bushing
The whole point of a bushing like this is giving you the exact amount of neck tension to hold the bullet firmly without overworking the brass. To find your size, measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inches to account for brass spring-back. Shooters chasing moly-coated bullets sometimes go a touch tighter. If your math lands you on .261, this is your bushing.
Where the Redding .261 Bushing Fits In
This is a common size for 6mm-class cartridges and similar neck diameters, and it is a favorite in benchrest and precision circles for exactly that reason. It is sold as a single bushing, so a lot of handloaders keep a few neighboring sizes on hand to fine-tune tension as their brass work-hardens over multiple firings. Less sizing effort, consistent tension, and a coating that keeps things slick make this a smart add to any precision reloading setup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76261
- UPC: 611760762611
- Bushing Diameter: .261 inch
- Style: Titanium Nitride (TiN) Coated
- Material: Heat Treated Steel
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 inch O.D. x 3/8 inch Long
- Compatibility: Redding Bushing Style Dies; interchanges with Wilson-style bushings
- Ammunition Type: Rifle
- Quantity: 1 bushing
- Country of Origin: United States
What’s Included
- One Redding .261 Titanium Nitride Neck Sizing Bushing (MPN 76261)
Frequently Asked Questions
What dies does the Redding .261 TiN neck sizing bushing fit?
It fits all Redding Bushing Style neck sizing and Type S dies, and it interchanges with Wilson-style bushings. Because it uses the standard 1/2 inch O.D. by 3/8 inch length, it also works in most popular brands of bushing dies. The .261 size is marked right on the bushing for easy identification.
How do I know if .261 is the right bushing size for my loads?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inches to allow for brass spring-back and bullet tension. If that number works out to .261, this is your bushing. Many handloaders keep a few sizes near their target to fine-tune tension as brass work-hardens over repeated firings.
What is the difference between the TiN bushing and the plain steel version?
Both are made from the same heat treated steel and share identical external dimensions, so they interchange freely. The titanium nitride coating on this version adds extra surface hardness and lubricity, which reduces sizing friction and makes the stroke a little smoother. It is a nice upgrade if you size a lot of brass or just want the slickest operation possible.
Is this bushing sold individually or as a set?
This is a single .261 bushing. Reloaders often build up a small collection of neighboring sizes so they can adjust neck tension precisely for different bullets, brass lots, and the number of times the brass has been fired.




Reviews
There are no reviews yet.