Description
Loading up .44 Special and .44 Magnum gets a whole lot more precise with the Redding Premium Handgun Die Set. This is a three-die setup that takes Redding's already well-regarded Series A tooling and adds the two upgrades handloaders ask for most: a NxGEN titanium carbide sizing die and a micrometer-adjustable seating die. The result is a set that produces concentric, repeatable ammo you can trust in everything from a Smith & Wesson Model 29 to a Ruger Redhawk.
What Sets the Redding 66194 Die Set Apart
The sizing die uses a titanium carbide ring, so you can skip the case lube and still get smooth, consistent resizing back to spec. The real star is the special expander die, which carries Redding's expander plug coated in titanium nitride for added hardness, slickness, and durability. That TiN coating also cuts down on brass buildup, which matters if you run big batches. The expander itself does several jobs in one pass: a smooth entry radius eases the case onto the plug, a concentric ring opens the mouth just slightly for better bullet alignment, and a final taper gives you a touch of flare so cast and lead bullets seat without shaving.
Dialing In Bullet Seating With the Premium Set
The seating die comes fitted with Redding's Bullet Seating Micrometer, calibrated in .001-inch increments. Once you find a load your revolver likes, write down the setting and you can return to that exact overall length any time by dialing it back in. For these straight-wall revolver cartridges, the seating die also applies a roll crimp, which is exactly what you want for keeping bullets locked in place against magnum recoil. You can seat and crimp in one stroke, or back the die off and run a dedicated crimp die if you prefer to separate the steps.
Everything rides on standard 7/8-14 threaded bodies, so this set drops into single-stage, turret, and progressive presses alike. These dies are made in the USA and built to the kind of tolerances that have earned Redding its reputation among serious reloaders.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 66194
- UPC: 611760661945
- Caliber: 44 Special / 44 Magnum
- Set Type: Premium 3-Die Set
- Sizing Die: NxGEN Titanium Carbide
- Expander Die: Special Expander with TiN-coated plug
- Seating Die: Premium with Bullet Seating Micrometer
- Micrometer Increments: 0.001 inch
- Crimp Type: Roll crimp
- Bullet Diameter: 0.430 inch
- Shellholder: #19
- Thread: 7/8-14
- Country of Origin: USA
What’s Included
- NxGEN Titanium Carbide Sizing Die
- Special Expander Die (TiN-coated expander plug)
- Premium Seating Die with Bullet Seating Micrometer
- Storage/loading block die box
- Spare decapping pin
- Hex wrench
- Instructions
Frequently Asked Questions
What dies come in the Redding 66194 Premium Handgun Die Set?
You get three dies: a NxGEN titanium carbide sizing die, a special expander die with a TiN-coated plug, and a premium seating die fitted with the Bullet Seating Micrometer. Together they handle sizing, case mouth expansion, and precise bullet seating for both .44 Special and .44 Magnum. The dies ship in a die box that doubles as a handy loading block.
Do I need case lube with the carbide sizing die?
No. The titanium carbide sizing ring lets you resize straight-wall .44 brass without lubing each case, which saves a lot of time and cleanup. Many reloaders still like a light touch of lube when running very high volume, but it is not required.
Does the seating die roll crimp or taper crimp?
The seating die applies a roll crimp, which is the correct choice for .44 Special and .44 Magnum revolver loads. You can seat and crimp in a single stroke, or back the die off to seat only and run a separate crimp die if you prefer splitting the operations. A good roll crimp into the cannelure keeps bullets from walking out under magnum recoil.
Will this die set work on a progressive press?
Yes. All three dies use standard 7/8-14 threaded bodies, so they fit single-stage, turret, and progressive presses without issue. That makes it a flexible choice whether you load a few boxes at a time or run large batches.





Reviews
There are no reviews yet.