Description
Redding's Competition Pistol Seating Die is the one you reach for when you want your .45 ACP rounds seated straight and repeatable every single time. It uses a precision fitting, spring-loaded seating stem that drops down into the die and aligns the bullet with the case mouth well before any seating pressure hits. As the case and bullet travel up together, that alignment stays locked in until the bullet is seated, which is how Redding tackles the concentricity issues you run into with ordinary seating dies.
What Sets the 55189 Apart
The seating stem is precision ground to match bullet diameter, and the fit between the bullet guide and stem is tight enough that the stem can be shown to float on a column of trapped air. That kind of tolerance is what keeps runout low and your rounds consistent. This die covers .45 ACP along with .45 GAP and .45 Auto Rim, so it earns its keep across more than one chambering.
Dialing In Seating Depth
The built-in micrometer is calibrated in .001" increments and is infinitely adjustable with no clicks, plus a zero-set feature that lets you lock in your favorite seating depth. Switching between bullet profiles or working up a new load becomes quick and repeatable, since you can record a setting and return to it exactly. It's a real time saver if you shoot more than one bullet weight or style out of your .45.
Built for the Bench or the Progressive
The 7/8-14 threaded body is slightly extended for full lock ring engagement, and the oversize bellmouth chamfer at the bottom eases case and bullet entry on a progressive press. That makes this die right at home on a Dillon or any standard single stage. Keep in mind it's a dedicated seater with no crimping capability, since Redding believes crimp should be a separate step. Pair it with a taper or profile crimp die to finish your rounds the right way.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55189
- UPC: 611760551895
- Die Type: Competition Bullet Seating Die
- Caliber: .45 ACP / .45 GAP / .45 Auto Rim
- Micrometer Adjustment: Calibrated in .001" increments, infinitely adjustable with zero-set
- Thread: 7/8-14
- Seating Stem: Spring-loaded, precision ground to bullet diameter
- Crimp: None (seating only)
- Material: Steel
- Press Compatibility: Single stage and most progressive presses
- Shipping Weight: 0.9 lb
What’s Included
- Redding Competition Pistol Seating Die (.45 ACP)
- Plastic storage case
Frequently Asked Questions
Does the Redding Competition Seating Die crimp the case?
No, this is a dedicated seating die with no crimping capability. Redding builds it this way because the best reloads come from crimping as a separate step. To finish your rounds, pair it with a taper crimp or profile crimp die.
What calibers will the 55189 die load?
This die is set up for .45 ACP, and it also handles .45 GAP and .45 Auto Rim since they share the same case dimensions. That gives you some flexibility if you load more than one .45 chambering.
Will this die work on a progressive press like a Dillon?
Yes. The 7/8-14 body is slightly extended for full lock ring engagement, and the oversize bellmouth chamfer at the bottom of the die helps cases and bullets feed smoothly. It runs well on progressives as well as a standard single stage press.
How does the micrometer adjustment work?
The micrometer is calibrated in .001" increments and is infinitely adjustable with no clicks, so you can fine-tune seating depth precisely. It also has a zero-set feature that lets you record a favorite depth and return to it exactly, which makes swapping bullet styles quick and repeatable.




Reviews
There are no reviews yet.