Description
The Redding Competition Rifle Seating Die for .22-250 Remington is built for handloaders who care about concentricity and repeatable seating depth. What sets this one apart from a standard seater is the sliding sleeve that captures the case and bullet, aligning both inside a close-fitting, precision-ground chamber before the bullet ever starts moving into the case neck. The result is straight-line seating with far less runout, which is exactly what you want when you're working up a load for a flat-shooting varmint round like the .22-250.
What Makes the 55106 Seating Die Different
The heart of this die is the floating seating stem system. The fit between the bullet guide and the seating stem is tight enough that the stem effectively floats on a column of air, and the stem itself is precision ground to match bullet diameter. That combination is what Redding uses to tackle the concentricity problems that creep into ordinary seating dies. Because the case is fully supported in the sleeve during the stroke, the case doesn't shift around while the bullet seats.
Dialing In Seating Depth with the Micrometer Head
The micrometer adjustment is calibrated in .001-inch increments and adjusts infinitely without clicks, so you can fine-tune seating depth right down to the thousandth. There's also a zero-set feature that lets you record your favorite depth and return to it after making changes. For load development where you're testing a bullet at several jump distances off the lands, that repeatability saves a ton of guesswork at the bench.
A Note Before You Order
This is a seating die only and does not crimp the bullet. If your load calls for a crimp, you'll want to add a separate crimp die to your setup. For most precision .22-250 loads shooting match or varmint bullets, a crimp isn't part of the recipe anyway, so plenty of reloaders run this one on its own with excellent results.
Key Specifications
- Caliber: .22-250 Remington
- Die Type: Competition Bullet Seating Die (does not crimp)
- Case Type: Bottleneck Rifle
- Adjustment: Micrometer, .001" increments, infinitely adjustable with zero-set feature
- Seating Stem: Precision ground to match bullet diameter (STD profile)
- Bullet Diameter: 0.224"
- Material: Steel
- Thread: 7/8"-14
- Manufacturer: Redding
- Manufacturer Part Number: 55106
- UPC: 611760551062
- Shipping Weight: 0.95 lb
What’s Included
- Redding Competition Seating Die with sliding chamber sleeve
- Micrometer adjustment head with precision-ground seating stem
- Plastic storage box
Frequently Asked Questions
Does the Redding Competition Seating Die crimp the bullet?
No, this is a seating die only and it does not apply a crimp. If your .22-250 load needs a crimp, you'll need to purchase a separate crimp die. Most precision loads for this cartridge don't call for a crimp, so many reloaders run the seating die by itself.
How precise is the micrometer on this .22-250 seating die?
The micrometer is calibrated in .001-inch increments and adjusts infinitely without clicks, so you can set seating depth right down to the thousandth. It also includes a zero-set feature that lets you record a favorite depth and return to it quickly. That makes it ideal for load development and dialing in bullet jump.
What makes the Competition Seating Die better than a standard seater?
The sliding sleeve captures the case and bullet and aligns both in a close-fitting, precision-ground chamber before seating begins, which keeps the case from moving during the stroke. Combined with the floating, precision-ground seating stem, this dramatically reduces runout. The payoff is straighter, more concentric ammo and tighter groups.
Can I use a VLD bullet with the 55106 seating die?
The die ships with a standard profile seating stem, which works well for most conventional bullets. If you're loading long, pointed VLD-style bullets, Redding offers a VLD profile stem (part number 55722) sold separately that better matches that nose shape. Swapping stems is quick and helps avoid marking the bullet ogive.




Reviews
There are no reviews yet.