0
0

Redding Type S Match Bushing Neck Die Set .28 Nosler 3-Die

UPC: 611760387906

$207.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloading the .28 Nosler is about chasing velocity and consistency out of that long, sharp-shouldered case, and this Redding Type S Match Bushing Neck Die Set gives you the control to do it right. This is a three-die set built around the bushing system, meaning you choose the neck diameter and tension instead of being stuck with whatever a fixed die hands you. For a hard-charging 7mm magnum like the .28 Nosler, that kind of tuning pays off in tighter groups and more uniform brass life.

What the Type S Bushing Neck Die Brings to the Bench

The heart of the set is the Type S bushing neck sizing die. It uses interchangeable bushings available in .001 inch increments, so you set neck tension exactly where you want it for your brass and your rifle. The bushing floats and self-centers on the case neck, which helps keep runout low and concentricity high. An adjustable decapping rod lets you size only part of the neck length if that is how you like to run things, and the decapping rod comes with a standard size button for reloaders working commercial brass as-is. A decapping pin retainer is also included, so if you sort or turn your necks for uniformity you can neck size without the button entirely.

Rounding Out the Match Bushing Neck Die Set

The body die handles full length sizing of the case body and bumps the shoulder back for easy chambering without touching the neck, which is exactly what you want after a few firings when brass starts getting sticky. The Redding competition seating die is the star of the seating operation, using a spring-loaded sleeve that aligns the bullet and case before the bullet ever moves, delivering the straight, repeatable seating that serious .28 Nosler loads demand.

Keep in mind the neck bushings and shellholder are sold separately so you can match everything to your exact brass and press setup.

Key Specifications

  • Manufacturer: Redding
  • Caliber: .28 Nosler
  • Die Type: Type S Match Bushing Neck Sizing Set
  • Number of Dies: 3
  • Bullet Diameter: 0.284 in
  • Bushing Increments: .001 in
  • Material: Case hardened steel
  • Thread: 7/8-14
  • Standard Shellholder: #6 (sold separately)
  • Manufacturer Part Number: 38790
  • UPC: 611760387906
  • Shipping Weight: 1.76 lb

What’s Included

  • Type S bushing neck sizing die (with decapping rod and standard size button)
  • Body die
  • Competition seating die
  • Decapping pin retainer
  • Plastic storage case

Frequently Asked Questions

Does the Type S Match Bushing Neck Die Set come with bushings?

No, the neck sizing bushings are sold separately. Redding does this on purpose so you can select the exact bushing in .001 inch increments to match your brand of brass and the neck tension you want. Most reloaders keep a few bushings on hand to fine-tune across different lots of .28 Nosler brass.

Is a shellholder included with this die set?

No, the shellholder is not included. The .28 Nosler uses a standard #6 shellholder, which you can pick up separately. The dies thread into any standard 7/8-14 press, so they work with common single stage and turret presses.

What is the difference between the neck die set and the full bushing die set?

This Type S Match Bushing Neck Die Set sizes only the case neck with the bushing while a separate body die handles the case body and shoulder bump as needed. A full bushing set resizes the body and neck in one stroke. Many precision reloaders like the neck set because it works the brass less and can extend case life.

Why choose a bushing die over a standard neck die for .28 Nosler?

A bushing die lets you control exactly how much neck tension you apply, which is a big deal for an accuracy-focused magnum like the .28 Nosler. The self-centering bushing also improves concentricity and keeps runout down. That translates to more uniform bullet grip and tighter, more consistent groups downrange.

Additional information

UPC

611760387906

Manufacturer

Manufacturer Part Number

38790

Shipping Weight

1.76

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Match Bushing Neck Die Set .28 Nosler 3-Die”