Description
The Redding Master Hunter (MH-C) Die Set brings bench-rest level precision to the .30-06 handloader who actually hunts. This two-die set combines a full-length sizing die with a free-floating carbide size button and the Redding Competition Seating Die, the same micrometer seater that put Redding on the map in the match world. If you want ammo that feeds slick, chambers without a fight, and shoots consistently round after round, this is the set that gets you there.
What Makes the Master Hunter MH-C Different
The idea here is simple. Hunters need full-length sizing because when a big buck steps out and you need a fast follow-up shot, a case that drops in and locks up every time matters more than anything. The full-length die resizes the case body and sets the shoulder back as needed to promote reliable chambering in your rifle. The carbide size button smooths out inside-neck sizing without heavy lube, which means less drag on the brass and a cleaner operation overall.
The Competition Seating Die
This is the star of the set. The Competition Seating Die uses a precision-ground sliding sleeve that fully captures and aligns the case before the bullet ever starts moving. That alignment is what gives you low runout and bullets seated dead straight. On top sits a micrometer head calibrated in .001-inch increments with a zero feature, so dialing in seating depth or returning to a proven load setting takes seconds and zero guesswork. It is worth noting the tolerances inside this die are tight, so brass from an oversized or out-of-spec chamber can feel snug going in, which is really just a sign of how precisely it is built.
The Master Hunter MH-C was inspired by the success of Redding's National Match Die Sets, and it shows. For the .30-06 shooter loading hunting rounds that need to perform in the field and on paper, this set earns its keep every time you run the press.
Key Specifications
- Caliber: .30-06 Springfield
- Set Type: Master Hunter (MH-C) 2-Die Set
- Sizing Die: Full-Length Sizing Die with carbide size button
- Seating Die: Redding Competition Micrometer Seating Die
- Micrometer Increments: 0.001 inch per increment, 0.050 inch per revolution
- Die Threads: 7/8-14 standard
- Manufacturer: Redding
- Manufacturer Part Number: 28148
- UPC: 611760281488
- Shipping Weight: 1.52 lbs
What’s Included
- Full-Length Sizing Die with carbide size button and decapping/expander unit
- Redding Competition Micrometer Seating Die
- Spare decapping pin
- Allen wrench for lock rings
- Plastic storage case
Frequently Asked Questions
What dies come in the Redding Master Hunter MH-C .30-06 set?
This is a two-die set that includes a full-length sizing die fitted with a carbide size button and the Redding Competition micrometer seating die. It does not include a separate neck-sizing die. If you want a three-die setup with a neck sizer added, that would be the Master Hunter Deluxe set instead.
What does the carbide size button do on the Master Hunter sizing die?
The free-floating carbide size button handles the inside-neck sizing portion of the full-length resize. Because it is carbide, it moves through the case neck smoother and with less lubrication needed than a standard steel button. The result is less drag on your brass and a cleaner, more consistent sizing stroke.
How precise is the Competition seating die's micrometer?
The micrometer head adjusts seating depth in .001-inch increments, with a full revolution equaling .050 inch. It also has a zero feature so you can mark a favorite setting and return to it later. Combined with the sliding sleeve that captures and aligns the case, you get very repeatable seating depth and straight ammunition.
Will this Master Hunter set work with any standard press?
Yes. Both dies use standard 7/8-14 threads and work in any press that accepts standard dies. You will need the correct .30-06 shell holder, which is sold separately.




Reviews
There are no reviews yet.