Description
If you handload for the 7mm PRC and want tighter control over your brass and seating depth, the Redding Instant Indicator is one of the most repeatable tools you can keep on the bench. It threads into your press like a die and lets you compare the shoulder position of fired and sized cases, so you know exactly how much shoulder bump your sizing die is giving you. That same setup checks bullet seating depth uniformity, which is where a lot of accuracy lives on a cartridge like the 7mm PRC. This listing is the version without a dial indicator, so you supply your own gauge and save some money if you already have one in the drawer.
What the 7mm PRC Instant Indicator Does on the Bench
The tool quickly checks headspace from the case shoulder to the base, which is the information you need to set your sizing die for the precise amount of shoulder bump. Reloaders who use these tend to like how little guesswork is involved. Measurements for shoulder position and bullet length come out consistent trip after trip, without the feel or knack that some caliper-based comparator methods require. It is handy for sorting brass fired in different rifles, batching cases by shoulder position, and sorting loaded rounds by seating depth.
Range Adapter and Bullet Seating Checks
This version now ships with the Range Adapter, so you are not tied to a reloading press. You can run quick comparisons at the range or in the field, which is a nice touch when you are load testing and want immediate feedback. To check bullet seating depth, you drop in a bore diameter bushing of the proper size, and one is included for the 7mm PRC. Keep in mind the Redding bushing is nominal bore diameter and contacts the bullet ogive at a slightly different point than most caliper-based comparators, so track your numbers against this tool rather than cross-referencing another gauge.
One more thing worth knowing: the Instant Indicator can be used across a family of cartridges that share the same shoulder angle, so it may do double duty beyond just the 7mm PRC depending on what else you load.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 17936
- UPC: 611760179365
- Cartridge: 7mm PRC
- Tool Type: Headspace and Bullet Seating Depth Comparator
- Dial Indicator: Not included (user supplied)
- Measurement Resolution: Compares within 0.001 inch
- Range Adapter: Included for use away from the press
- Bore Diameter Bushing: One included for 7mm PRC
- Shipping Weight: 1.062 lbs
What’s Included
- Instant Indicator die body for 7mm PRC
- One bore diameter bushing
- Surface contactor
- Shoulder contactor
- Headspace gauge
- Range Adapter
- Complete instructions
Frequently Asked Questions
Does the 7mm PRC Instant Indicator come with a dial indicator?
No, this is the version without the dial indicator. You supply your own gauge, which typically uses a 0.375 inch stem diameter to fit the tool. It is the more cost-effective choice if you already have a compatible dial indicator on hand.
What can I measure with the Redding Instant Indicator?
It checks headspace from the case shoulder to the base so you can set your sizing die for the right amount of shoulder bump. It also measures bullet seating depth uniformity using the included bore diameter bushing. On top of that, it is useful for sorting brass by shoulder position or sorting loaded rounds by seating depth.
Can I use this Instant Indicator at the range?
Yes. This version ships with the Range Adapter, which lets you run comparisons without a reloading press. That makes it convenient for load testing and quick checks in the field.
Will this 7mm PRC tool work with other cartridges?
The Instant Indicator can be used on a family of cartridges that share the same shoulder angle as the 7mm PRC. You may need the correct bushing for seating depth checks on other calibers. For straight headspace comparison it can cover more than one cartridge in that shoulder family.




Reviews
There are no reviews yet.