0
0

RCBS MatchMaster Full-Length Bushing Die Set 7mm PRC

UPC: 604544691269

$186.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS MatchMaster Full-Length Bushing Die Set in 7mm PRC is a two-die package aimed squarely at long-range and precision reloaders who want match-grade ammo without fighting their gear. The set pairs a full-length bushing sizing die with the MatchMaster micrometer seating die, giving you control over both neck tension and seating depth in one box. Both dies use a standard 7/8"-14 thread, so they drop right into any standard press.

What the MatchMaster Sizing Die Brings to the Bench

The full-length sizing die uses interchangeable neck bushings (sold separately) to set exactly how much tension your case neck puts on the bullet. That means you can fine-tune one of the biggest variables behind consistent velocity and accuracy instead of being stuck with a fixed expander. To pick a bushing, measure the outside neck diameter of a loaded round and subtract about .002" to .003" to allow for brass springback. RCBS recommends keeping a couple of bushings above and below your target on hand. The die also runs a Titanium Carbo Nitride coated expander, which cuts down on friction and brass buildup so the expander pulls through case necks smoother with less neck stretch.

Why the MatchMaster Seater Die Stands Out

The seater is where this set earns its keep. It features an oversized micrometer with big, easy-to-read markings so you can dial seating depth in reliable one-thousandth increments. The real party trick is the loading window with a bullet retention system: drop the bullet in through the window, run the press, and the internal sleeve catches and aligns the bullet to the case before they ever meet. No balancing projectiles on a case mouth, no fingers in harm's way, and the free-floating, self-centering stem guides everything together for seriously concentric results. Reloaders who've run these dies routinely report some of the lowest runout numbers they've measured.

Inside surfaces are precision-drilled, reamed, and hand-polished, the seater wears a deep blued finish, and the whole set is made in the USA and backed by a Limited Lifetime Warranty.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 28108
  • UPC: 604544691269
  • Caliber: 7mm PRC
  • Die Set Type: Full-Length Bushing, 2-Die Set
  • Dies Included: Full-Length Sizing Die, Bullet Seating Die
  • Neck Bushings: Interchangeable, sold separately
  • Seater Adjustment: Oversized micrometer, .001" increments
  • Expander: Titanium Carbo Nitride coated
  • Thread Size: 7/8"-14 standard
  • Material: Hardened steel
  • Warranty: Limited Lifetime
  • Country of Origin: USA
  • Shipping Weight: 1.4 lbs

What’s Included

  • Full-Length Bushing Sizing Die
  • MatchMaster Micrometer Bullet Seating Die
  • Spare decapping stem assembly (non-expander decapping pin holder)
  • Instruction manual
  • Reloading data sheet

Frequently Asked Questions

Does the MatchMaster bushing die set come with neck bushings?

No, the neck bushings are sold separately, which is standard for bushing-style dies. This lets you buy the exact diameters you need for your brass and preferred neck tension. A good starting point is measuring a loaded round's neck, subtracting .002" to .003", and keeping a couple of sizes above and below that on hand.

What does the loading window on the MatchMaster seater actually do?

The loading window lets you drop the bullet into the die through an opening rather than balancing it on top of the case mouth. An internal sleeve holds the bullet and aligns it with the case before seating, which improves concentricity and keeps your fingers clear. It makes the seating process faster and more repeatable once you get the rhythm down.

Will these dies fit my press?

Yes, both dies use the standard 7/8"-14 thread, so they thread into any standard single-stage or progressive press. You will still need the correct shell holder for 7mm PRC, which is not included in this set.

What's the benefit of a bushing sizing die over a standard full-length die?

A bushing die lets you control exactly how much your case neck gets sized down, which sets your neck tension on the bullet. That's one of the bigger levers behind consistent velocity and tighter groups. It also works the brass less than a fixed-diameter sizer, which can mean longer case life.

Additional information

UPC

604544691269

Manufacturer

Manufacturer Part Number

28108

Caliber/Gauge

7MM PRC

Shipping Weight

1.4

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster Full-Length Bushing Die Set 7mm PRC”