0
0

RCBS Supreme Die Set 6mm Creedmoor – Full Length 2-Die Set 31869

UPC: 604544690644

$80.99

23 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Supreme Die Set in 6mm Creedmoor takes the guesswork out of getting set up. Instead of ordering a die set, then hunting down the right shell holder and a case gauge separately, you get all four pieces in a single package. That means a full-length sizing die, a bullet seating die, the correct shell holder for the cartridge, and a chamber case length gauge, all matched to 6mm Creedmoor and ready to thread into your press.

What the RCBS Supreme 6mm Creedmoor Set Actually Does

The full-length sizing die works the entire case body and shoulder back down to spec while decapping the spent primer, which keeps your reloads chambering smoothly round after round. The seating die handles bullet seating and includes a built-in crimp feature you can dial in or back off depending on your load. Running match bullets and want zero crimp? Just back the die off so it barely contacts the case mouth. The chamber case length gauge lets you check your brass against proper dimensions so you know when it is time to trim.

Built to the RCBS Standard

These dies are machined from steel to tight tolerances and finished the way RCBS has been doing it for decades. They use the industry-standard 7/8"-14 thread, so they drop into just about any single stage or progressive press out there, whether that is RCBS, Hornady, Lee, Lyman, Redding, or Dillon. The whole set is made in the USA and backed by the RCBS lifetime warranty.

A Smart Starting Point for 6mm Creedmoor

6mm Creedmoor has earned a loyal following with long-range target shooters and hunters for its flat trajectory and mild recoil, and it rewards handloaders who like to fine-tune their ammo. The Supreme set is a clean, convenient way into loading the cartridge because it bundles the extras most beginners forget to order. Seasoned reloaders appreciate not having to track down the shell holder and gauge as loose parts too. One box, everything matched, and you are off to the bench.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 31869
  • UPC: 604544690644
  • Caliber: 6mm Creedmoor
  • Die Type: Full Length
  • Pieces in Set: 4
  • Material: Steel
  • Thread: 7/8"-14 (industry standard)
  • Country of Origin: Made in USA
  • Warranty: RCBS Lifetime Limited Warranty
  • Shipping Weight: 1.55 lbs

What’s Included

  • Full-length sizing die
  • Bullet seating die
  • Shell holder
  • Chamber case length gauge

Frequently Asked Questions

What comes in the RCBS Supreme Die Set for 6mm Creedmoor?

You get four pieces in the box: a full-length sizing die, a bullet seating die, the correct shell holder for 6mm Creedmoor, and a chamber case length gauge. It is essentially a standard RCBS full-length die set with the shell holder and case gauge bundled in, so you have the main parts needed to start loading the cartridge without buying extras separately.

Will these dies fit my press?

Yes, in nearly all cases. RCBS dies use the industry-standard 7/8"-14 thread, which fits single stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and others. That thread standard is universal across the industry, so you should be good to go with whatever press you own.

Does the seating die apply a crimp?

The seating die has a built-in crimp feature that you can use or skip depending on your load. If you want a crimp, thread the die down until it contacts the case the right amount. If you are loading match bullets and prefer no crimp, just back the die off so it barely touches the case mouth and it will seat without crimping.

What does the chamber case length gauge do?

The case length gauge lets you check your resized brass against proper chamber dimensions so you know when cases have stretched past spec and need trimming. Keeping brass trimmed to length is important for consistent crimps and safe, reliable chambering, so having the gauge included saves you an extra purchase.

Additional information

UPC

604544690644

Manufacturer

Manufacturer Part Number

31869

Caliber/Gauge

6mm Creedmoor

Shipping Weight

1.55

Reviews

There are no reviews yet.

Be the first to review “RCBS Supreme Die Set 6mm Creedmoor – Full Length 2-Die Set 31869”