Description
The RCBS MatchMaster Competition Seating Die for 6.5 PRC is built for handloaders who care about seating depth down to the thousandth. It blends the best ideas from RCBS's older Gold Medal and Competition dies into one refined tool, then adds a few touches that make loading precision ammo easier at the bench. The body is machined from case-hardened steel, precision reamed, hand polished, and wrapped in a deep blued finish that looks right at home next to a nice rifle.
What Sets the MatchMaster 6.5 PRC Seater Apart
The headline feature is the bullet seating window. Instead of trying to balance a projectile on the case mouth and guide it up with your fingers, you drop the bullet in through the side opening and run the press. An internal sleeve catches the bullet, holds it in alignment with the case, and guides the two together all the way through the stroke. That hands-free setup means no mashed fingers and far fewer tipped or misaligned bullets.
Dialing In Seating Depth With the MatchMaster
Seating depth is handled by a large oversize micrometer with big, easy-to-read numbers and hash marks. Dial one thousandth of an inch and that is what you get, which makes load development and chasing the lands a lot less fiddly. The free-floating, self-centering seating stem is the other half of the equation, letting bullet and case find their own alignment before they ever meet. Reloaders who measure runout have noted this die produces some of the lowest, most consistent numbers they have seen, and it earns steady praise from the precision crowd.
Fitment and Build of the 6.5 PRC MatchMaster Die
This is the bullet seating die only, not a full set, and it is cut specifically for the 6.5 PRC. It uses the industry standard 7/8-14 thread, so it threads into RCBS presses and any other single-stage or turret press built to that spec. Made in the USA and backed by the RCBS limited lifetime warranty, it is the kind of tool you set once and trust round after round.
Key Specifications
- Manufacturer: RCBS
- Model: MatchMaster Competition Seating Die
- Manufacturer Part Number: 32140
- UPC: 604544654622
- Caliber: 6.5 PRC
- Die Type: Micrometer Bullet Seating Die
- Number of Dies: 1 (seating die only)
- Thread Size: 7/8-14
- Adjustment: Oversize micrometer, .001 inch increments
- Seating Stem: Free-floating, self-centering
- Material: Case-hardened steel, hand polished
- Finish: Deep blued
- Country of Origin: Made in USA
- Warranty: Limited Lifetime Warranty
- Shipping Weight: 0.94 lbs
What’s Included
- RCBS MatchMaster Competition Seating Die for 6.5 PRC (seating die only)
- Green RCBS die storage box
Frequently Asked Questions
Does the MatchMaster 6.5 PRC die come with a sizing die?
No. This is the bullet seating die only, not a two-die or three-die set. If you need to size and prep brass, you will want to pair it with a MatchMaster or standard RCBS sizing die for 6.5 PRC.
Will this seating die fit my press?
Yes, it uses the standard 7/8-14 thread found on nearly every single-stage and turret reloading press. That means it threads right into RCBS presses as well as other brands built to that common spec.
What makes the MatchMaster seater different from a standard seating die?
Two things stand out. The bullet seating window lets you drop the bullet in through the side and run the press instead of balancing it on the case mouth, and the free-floating, self-centering stem aligns the bullet and case for excellent concentricity. The oversize micrometer then lets you set seating depth in precise .001 inch increments.
Can I use this die to adjust seating depth for different bullets?
Absolutely. The micrometer adjustment makes it easy to change seating depth in one-thousandth increments, so load development and tuning to your rifle's lands is straightforward. The large, clearly marked numbers make it simple to return to a known setting.




Reviews
There are no reviews yet.