Description
If you're loading .338 Lapua Magnum for long range work, the seater die is where consistency lives or dies, and this is one of the best RCBS has ever built. The MatchMaster brings together the strongest ideas from the old Gold Medal and Competition series into a single tool that's machined, hand polished, and finished with a deep blued coating that looks right at home next to fine firearms.
What really sets it apart is the bullet loading window cut into the side of the die. Instead of balancing a long .338 bullet on the case mouth and guiding it up with your fingers, you drop the projectile through the window, raise the case, and the die handles the rest. That bullet retention system holds the projectile steady while a cartridge-specific internal sleeve catches and aligns it to the case for seriously concentric results. Reloaders who chase low runout numbers tend to notice the difference right away.
Dialing In the MatchMaster .338 Lapua Seater Die
Seating depth is controlled by a large oversize micrometer with scalloped cuts on the thimble and big, easy-to-read markings. You get adjustment in one-thousandth increments, and the feel of the dial is smooth and repeatable. The free-floating, self-centering seating stem is shaped to spread force across the bullet ogive rather than hammering the tip, which matters when you're running long, high-BC or tipped projectiles common in .338 Lapua loads.
Fit and Setup for the MatchMaster Seater Die
This die uses the standard 7/8"-14 thread, so it threads right into single-stage and turret presses without any fuss. Keep in mind this is a standalone seating die, not a full die set, so you'll pair it with your preferred sizing die. Machined from case-hardened steel, precision drilled and reamed, then hand polished, it's built in the USA and backed by the RCBS limited lifetime warranty. For handloaders who want match-grade bullet seating without the finger gymnastics, it's tough to beat.
Key Specifications
- Manufacturer: RCBS
- Caliber: .338 Lapua Magnum
- Die Type: Micrometer Bullet Seating Die
- MPN: 16640
- UPC: 604544654530
- Thread Size: 7/8"-14
- Material: Case-Hardened Steel
- Finish: Deep Blued
- Adjustment: Oversize Micrometer, .001 Increments
- Seating Stem: Free-Floating, Self-Centering
- Country of Origin: USA
- Warranty: RCBS Limited Lifetime
- Quantity: 1 Die
- Shipping Weight: 0.95 lbs
What’s Included
- RCBS MatchMaster .338 Lapua Magnum Seater Die
- Die storage box
Frequently Asked Questions
Is the MatchMaster .338 Lapua die a complete die set or just the seater?
This is a standalone bullet seating die only, not a full set. You'll want to pair it with a sizing die, whether that's an RCBS full-length or neck sizer or your current .338 Lapua resizer. It threads right in alongside whatever sizing die you already run.
How does the bullet loading window on the MatchMaster seater die work?
Instead of setting the bullet on the case mouth and guiding it up with your fingers, you drop the projectile tail-down through the window cut into the side of the die. A retention system holds it in place while you raise the case, and the internal sleeve aligns everything for concentric seating. It's a nice touch when you're handling long, heavy .338 bullets.
Will this die fit my reloading press?
Yes, the MatchMaster seater uses the standard 7/8"-14 thread, so it fits the vast majority of single-stage and turret presses on the market. RCBS notes it isn't compatible with the RC Supreme press, so if you run that one, check before ordering.
How precise is the seating depth adjustment on the MatchMaster .338 Lapua seater die?
The oversize micrometer lets you adjust seating depth in one-thousandth of an inch increments, with large hash marks that are easy to read. Reloaders report the dial feels smooth and the markings track true, so you can repeat a setting and come right back to it. That repeatability is a big part of why this die posts such low runout numbers.





Reviews
There are no reviews yet.