Description
If you're feeding a .224 Valkyrie and tired of chasing factory ammo, this RCBS two-die set gets you loading your own with the kind of consistency the cartridge was built for. It's a full-length sizer paired with a bullet seater, machined from RCBS proprietary die steel and cut with standard 7/8-14 threads so it drops right into pretty much any single-stage or progressive press you already own.
What the .224 Valkyrie Full-Length Set Actually Does
The full-length sizer die handles three jobs in one pass. It squeezes the case body back down to SAAMI minimum dimensions, de-primes through the built-in expander-decapping unit, and expands the neck so it's ready to take a new bullet. Headspace is held to tight tolerances, which keeps the case body length from drifting while you size, and that matters a lot on a cartridge people load specifically for long-range accuracy. There are also small vents machined into the sizer that let trapped air and extra lube escape, so you're not denting or collapsing shoulders when the ram comes up.
Loading With the RCBS 11201 Die Set
The seater die seats most common .224 bullets to the depth you dial in, and it's got a built-in roll crimper so you can lock the bullet in place during the same stroke if your load calls for it. It's a clean, no-drama setup that rewards careful brass prep and consistent powder throws. Set your sizer, set your seating depth, and you'll find the Valkyrie turns out tight, uniform rounds without a lot of fuss.
One thing worth knowing up front: a shell holder is not part of this set, so if you don't already have the right one on your bench you'll want to grab it separately. The dies ship in the familiar green RCBS box that keeps them organized and protected between sessions, and like the rest of the line, they're made in the USA and backed by RCBS.
Key Specifications
- Caliber: .224 Valkyrie
- Set Type: Full-Length 2-Die Set (Group D)
- Dies Included: Full-Length Sizer, Bullet Seater
- Thread: 7/8-14 Standard
- Material: Proprietary Die Steel
- Crimp: Built-in Roll Crimper on Seater Die
- Sizing Standard: SAAMI Minimum Cartridge Dimensions
- Manufacturer: RCBS
- Manufacturer Part Number: 11201
- UPC: 604544634150
- Country of Origin: Made in USA
- Shipping Weight: 1.15 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Green RCBS die storage box
Frequently Asked Questions
Does the .224 Valkyrie die set come with a shell holder?
No, a shell holder is not included with this RCBS set. You'll need the correct shell holder for the .224 Valkyrie case head to run the dies in your press. If you've loaded similar cartridges before, there's a good chance you already have the right one on the bench.
Will this RCBS die set fit my reloading press?
Yes, the dies use the standard 7/8-14 thread, which is the common size for single-stage and progressive presses. That makes them compatible with the vast majority of reloading presses on the market. Just thread them in and set your adjustments.
What does the full-length sizer die do with .224 Valkyrie brass?
The sizer brings the fired case back down to SAAMI minimum dimensions, sizing the body and neck while de-priming the case in a single stroke. Headspace is held to tight tolerances so the case body length stays consistent. Built-in vents let trapped air and excess lube escape so you don't damage the case.
Can the seater die crimp the bullet too?
Yes, the seater die has a built-in roll crimper that can secure the bullet at the same time it's seated. You can use it or skip the crimp depending on what your load calls for. It handles most common .224 bullets and lets you dial in the seating depth you want.




Reviews
There are no reviews yet.