Description
The Sierra MatchKing 140 grain HPBT in 6.5mm/.264 caliber is one of those bullets that earned its reputation the hard way, on the firing line. Sierra builds the whole MatchKing line around one thing, and that is accuracy. These bullets carry very thin jackets drawn to a concentricity standard of roughly 0.0003 inch maximum variation, and weight is held to within plus or minus 0.3 grain. Pair that with a boat tail and a small hollow point meplat, and you get a projectile shaped to hold its line downrange.
What Makes the 140gr #1740 MatchKing Tick
This one measures .264 inches in diameter, weighs 140 grains, and carries a banded G1 ballistic coefficient of .535 at 2800 fps and above, dropping to .526 between 2800 and 2000 fps. Sectional density runs .287. For medium and high capacity 6.5mm cartridges, this bullet is a strong performer for ranges out to about 1000 yards, which is why HighPower and silhouette competitors have gravitated to it for years.
Loading the Sierra 140gr .264 MatchKing
One thing reloaders appreciate about the 140 is how forgiving it can be. Sierra points out that it is often picked as a long-range option for rifles built with slower twist barrels, including the old 1×9 twist .260 Remington rifles where it did very well. In a 6.5 Creedmoor, a 1:8 or 1:9 twist stabilizes it nicely, and medium to medium-slow powders like H4350, Varget, and RL-17 tend to shine with this bullet. Many folks find it a touch easier to tune than the heavier 142 grain, which makes load development a little less fussy.
A Quick Note on Use
MatchKing bullets are target projectiles through and through. Sierra does not recommend them for hunting applications, so keep these for punching paper, ringing steel, and chasing tight groups. If accuracy is your goal, this is a classic choice that keeps delivering.
Key Specifications
- Manufacturer: Sierra
- Manufacturer Part Number: 1740C
- UPC: 092763517406
- Model: MatchKing
- Caliber: 6.5mm / .264
- Bullet Diameter: 0.264 in
- Bullet Weight: 140 grain
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): .535 @ 2800 fps and above
- Sectional Density: 0.287
- Cannelure: No
- Core Material: Lead
- Jacket Material: Copper
- Intended Use: Match / Target / Competition
What’s Included
- Sierra MatchKing 6.5mm .264 140gr HPBT component bullets
Frequently Asked Questions
What twist rate do I need for the Sierra 140gr MatchKing?
A 1:8 or 1:9 twist will stabilize the 140 grain #1740 nicely in most 6.5mm chamberings, including the 6.5 Creedmoor. Sierra has noted this bullet often performs well even in slower twist barrels, like the old 1×9 twist .260 Remington rifles. That makes it a flexible option if you are not running the fastest twist out there.
Can I use these Sierra MatchKing bullets for hunting?
No, Sierra does not recommend MatchKing bullets for hunting applications. They are designed first and foremost for target and competition work, where consistency and ballistic performance matter most. Keep these for paper, steel, and group-chasing at the range.
What is the ballistic coefficient of the 140gr #1740 MatchKing?
It carries a banded G1 ballistic coefficient of .535 at 2800 fps and above, then .526 between 2800 and 2000 fps, and .521 at 2000 fps and below. Sectional density comes in at .287. Those numbers help it hold velocity and buck wind on the way out to long range.
What powders work well with the 140gr Sierra MatchKing in 6.5 Creedmoor?
The 6.5 Creedmoor runs best with medium to medium-slow powders, and popular choices with this bullet include H4350, Varget, and RL-17. Many reloaders find the 140 grain a little easier to tune than the heavier 142 grain, which smooths out load development. Always start low and work up using published Sierra data.





Reviews
There are no reviews yet.