Description
If you've picked up a box of Hornady 176gr .308 A-Tip Match bullets, this is the little part that makes them load right. The A-Tip's claim to fame is a long, precision-machined aluminum tip, and that tip is longer and slenderer than your typical polymer point. Run it through a standard seating stem and the bullet bottoms out on the nose instead of the ogive, which pushes on the meplat and throws off your concentricity. This stem is cut to match the A-Tip profile so pressure lands where it should.
Why the A-Tip 176gr Seating Stem Exists
Hornady built the A-Tip around that aluminum tip to move the center of gravity rearward and squeeze more consistency out of every shot. The downside for handloaders is that common seating stems, even VLD-style ones, tend to contact the tip rather than the shoulder of the bullet. That contact point is the whole reason runout creeps in. This 397143 stem is machined to fit the A-Tip nose geometry specifically, so the bullet sits square and seats without the tip getting mashed.
Fitting the 397143 Stem to Your Die
Swapping it in is about as simple as reloading gets. Pull the standard seating stem out of your Hornady Custom Grade seating die, thread this one in, and set your depth. No special tools, no fuss. It drops into the same Custom Grade dies you're already running for your other .30 cal loads.
One thing worth knowing up front: this stem is built for Hornady Custom Grade dies only. It is not compatible with Redding, RCBS, Forster, or other brands' dies, so if you're running a different die set you'll want to look at that maker's VLD or custom stem options instead. For anyone loading match-grade .308 with 176gr A-Tips and chasing tight groups at distance, this is the correct piece for the job and cheap insurance against pulled or dented tips.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397143
- UPC: 090255971439
- Caliber: 30 Cal .308"
- Bullet Weight: 176 Grain
- Bullet Type: A-Tip Match
- Material: Alloy Steel
- Compatibility: Hornady Custom Grade Seating Dies Only
- Quantity: 1 Stem
- Country of Origin: United States
What’s Included
- 1 Hornady A-Tip Match seating stem (30 Cal .308" 176gr, part number 397143)
Frequently Asked Questions
Why do I need a special seating stem for Hornady A-Tip bullets?
The A-Tip Match bullet has a long aluminum tip that runs longer and slimmer than standard polymer points. A regular seating stem bottoms out on that tip and seats the bullet by pushing on the meplat, which causes runout and can deform the tip. This 397143 stem is machined to match the A-Tip nose profile so it contacts the ogive and seats straight.
Will this A-Tip seating stem work in my Redding or RCBS dies?
No. This stem is designed to fit Hornady Custom Grade seating dies only and is not compatible with other manufacturers' dies. If you run a different brand, check with that maker about a VLD or custom seating stem for A-Tip bullets.
How do I install the 397143 stem?
It's a quick swap. Remove the standard seating stem from your Hornady Custom Grade seating die, thread this A-Tip stem in its place, and reset your seating depth. No special tools are needed.
Does this stem fit other 30 caliber A-Tip bullet weights?
This particular stem (397143) is cut for the 30 Cal .308" 176gr A-Tip. Hornady makes separate stems for other weights, like the 230/250gr .308 A-Tip, so match the part number to the exact bullet you're loading for the best fit.





Reviews
There are no reviews yet.