Description
If you're loading the 145 grain .277 ELD-X for your .270, a standard seating stem can leave a mark or ring on that polymer Heat Shield tip and throw off your consistency. This stem solves that. It's cut specifically to cradle the ogive and tip of this bullet, so each round seats with even contact and your concentricity stays where you want it. For anyone chasing tight groups out of a .270 Winchester or .270 WSM, that bullet-to-stem fit matters more than people expect.
Why the ELD-X .277 Seating Stem Makes a Difference
The ELD-X runs a sharp secant ogive and a polymer tip, and a generic stem contacts it in the wrong spot. This one is profiled to the 145 gr .277 bullet, which means clean seating depth, no deformed tips, and a more uniform cartridge overall length round after round. Small detail, big payoff when you're working up a load or trying to shave those last fractions off your group size.
Fitting the .270 ELD-X Stem Into Your Die
Swapping it in is about as simple as reloading gets. Back out the standard stem from your Hornady Custom Grade New Dimension seating die and thread this one in its place. No special tools, no fuss. Keep in mind this stem is built strictly for Hornady Custom Grade dies and won't fit seating dies from other brands, so it's a Hornady-to-Hornady setup.
The stem itself is machined steel and made to last through plenty of loading sessions. If you've already got a press dialed in for your .270 and you're feeding it ELD-X, this is the piece that lets those bullets seat the way they were designed to. It's a cheap insurance policy against a dinged tip and inconsistent seating depth.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397135
- UPC: 090255971354
- Model: ELD-X
- Caliber: .270 Caliber
- Bullet Diameter: .277 in
- Bullet Weight: 145 gr
- Bullet Type: ELD-X
- Material: Steel
- Compatibility: Hornady Custom Grade New Dimension seating dies
- Quantity: 1
- Country of Origin: United States
What’s Included
- 1 Hornady ELD-X seating stem (.270 Cal .277 145 gr)
Frequently Asked Questions
Will this ELD-X seating stem fit my dies?
This stem is made specifically for Hornady Custom Grade New Dimension seating dies. It is not compatible with seating dies from other manufacturers. If you're running a Hornady seater, it drops right in.
Which bullet is this stem matched to?
It's profiled for the Hornady 145 grain .277 diameter ELD-X bullet used in .270 Caliber loads such as .270 Winchester and .270 WSM. The stem's internal shape matches that specific bullet's ogive and tip so it seats without damage. Using the correct stem for your bullet is key to clean, consistent seating.
How do I install the seating stem?
Just unscrew the standard seating stem from your Hornady Custom Grade seating die and thread this one in its place. No special tools are needed. The whole swap takes a minute or two at the bench.
Why use a bullet-specific stem instead of the standard one?
The ELD-X has a sharp secant ogive and a polymer tip, and a generic stem can contact it in the wrong spot and leave a ring or deform the tip. This stem is cut to match the bullet profile, giving you even contact, consistent seating depth, and better overall round-to-round uniformity. For accuracy-focused handloaders, that consistency is well worth it.





Reviews
There are no reviews yet.