Description
If you're loading the 225 grain .30 caliber ELD Match bullet, the standard stem that shipped with your Hornady Custom Grade die wasn't cut for that long ogive. This replacement stem fixes that. It's machined to follow the exact profile of the 225gr ELD Match projectile so the contact point sits where it should, giving you square, repeatable seating without marring the bullet nose or crushing that polymer tip.
The stem is turned from steel and built to Hornady's Custom Grade tooling standards, so the fit and finish match the die it drops into. Installation is about as simple as it gets. You back out the standard stem, thread this one in, set your depth, and you're running. There's no gunsmithing or fussing involved, which is why most folks keep a few profile-specific stems on the bench for their favorite bullets.
Why the 225gr ELD Match Seating Stem Earns a Spot on Your Bench
Heavy, high BC bullets like the 225 ELD Match are what a lot of precision .308 and .300 magnum loaders build around, and seating depth is one of the biggest levers you have on consistency. A stem that cradles the correct part of the ogive keeps your seating force even and your runout down, which shows up on paper over a string. If you've ever seen scuffed tips or inconsistent seating with a generic stem, this is the cure.
What This ELD Match Seating Stem Fits
This one is caliber and bullet specific. It's made for .30 caliber (.308) 225 grain ELD Match bullets and drops into Hornady Custom Grade New Dimension seating dies. It will not work in dies from other brands, so keep that in mind if your press is set up with another maker's dies. Like the rest of Hornady's reloading gear, it's made in the USA and backed by their lifetime warranty.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397111
- UPC: 090255971118
- Caliber: .30 Caliber (.308)
- Bullet Weight: 225 Grain
- Bullet Profile: ELD Match
- Type: Bullet Seating Stem
- Fits: Hornady Custom Grade New Dimension Seating Dies
- Material: Steel
- Quantity: 1
- Made In USA: Yes
What’s Included
- 1 Hornady 30 Cal (.308) 225gr ELD Match seating stem (MPN 397111)
Frequently Asked Questions
Which dies does this 225gr ELD Match seating stem fit?
It's made for Hornady Custom Grade New Dimension seating dies. You remove the standard stem that came with your die and thread this one in its place. It is not compatible with seating dies from other manufacturers.
Why do I need a bullet-specific stem for the 225gr ELD Match?
The 225 grain ELD Match has a long, pointed ogive and a polymer tip that a standard stem doesn't contact in the right spot. This stem is profiled to match that exact bullet shape, so it seats squarely without scuffing the nose or damaging the tip. That translates to more consistent seating depth and lower runout.
Will this stem work with other .30 caliber bullets?
It's cut specifically for the 225 grain ELD Match bullet. It may contact other similar-profile .308 bullets reasonably well, but Hornady offers different profile-specific stems for other weights and designs. For best results, match the stem to the bullet you're loading.
Is any special tooling needed to install the ELD Match seating stem?
No. You simply back out the existing seating stem from your Hornady Custom Grade die, thread this one in, and reset your seating depth. It's a quick swap you can do right at the bench with no extra tools.




Reviews
There are no reviews yet.