Description
Anyone loading 6mm precision rounds knows the seating stem matters more than people give it credit for. This Hornady stem (part number 397103) is cut to match the pointed profile of 108 grain 6mm .243 bullets, so the ogive gets the contact instead of the sensitive meplat or polymer tip. The result is straighter seating, less runout, and bullets that go in the case looking exactly like they came out of the box.
Why This Hornady 6mm Seating Stem Earns Its Keep
The standard stems that ship with most die sets are cut for more of a general bullet shape, which can leave a ring or flat spot on longer, sleeker match projectiles. This one is machined specifically to cradle the 108gr 6mm .243 nose so the seating force spreads across the bullet shape instead of concentrating on a sharp edge. If you shoot ELD Match, A-MAX, ELD-X, or similar high BC bullets in your 6mm, that profile match keeps your tips clean and your groups honest.
Dropping the 397103 Stem Into Your Die
Installation is about as simple as reloading accessories get. Pull the standard seating stem out of your Hornady Custom Grade New Dimension seating die, thread this one in its place, and reset your seating depth. No special tools, no gunsmith, nothing to fuss with. Keep in mind this stem is built for Hornady Custom Grade dies and will not fit other brands, so it is a direct upgrade for folks already running the Hornady system.
For reloaders chasing tighter numbers off the bench or out past distance, a profile-matched stem is one of those small, inexpensive tweaks that quietly cleans up your ammo. Pair it with properly chamfered cases and you'll feel the difference in how smoothly those 108s seat.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397103
- UPC: 090255971033
- Caliber: 6mm (.243)
- Bullet Diameter: 0.243 in
- Bullet Weight: 108 grain
- Bullet Profile: ELD Match / A-MAX style
- Compatibility: Hornady Custom Grade New Dimension Seating Dies
- Die Type: Seating
- Gun Type: Rifle
- Quantity: 1
- Country of Origin: USA
What’s Included
- One (1) Hornady ELD Match seating stem (part number 397103) for 6mm .243 108gr bullets
Frequently Asked Questions
What dies does the Hornady ELD Match 6mm seating stem fit?
This stem is made for Hornady Custom Grade New Dimension seating dies. You simply remove the standard seating stem and thread this one in its place. It will not work with dies from other manufacturers, so it is meant as a direct upgrade within the Hornady system.
Which bullets work with the 397103 seating stem?
It is machined to match the profile of 6mm .243 108 grain ELD Match and A-MAX bullets. The same stem also plays nicely with similar-profile Hornady projectiles like the ELD-X in that caliber. Matching the stem to the bullet shape helps seat them without damaging the tip or ogive.
Why would I swap my factory seating stem for this one?
Standard stems are cut for a more general bullet shape and can leave a ring or flat spot on long, pointed match bullets. This stem cradles the 108gr nose so seating force spreads across the bullet instead of a sharp edge. The payoff is straighter seating, less runout, and cleaner tips for better consistency.
Is the Hornady 6mm seating stem hard to install?
Not at all. Pull the existing seating stem out of your Custom Grade die, thread this one in, and reset your seating depth. No special tools or gunsmithing required, so you can be back to loading in a couple of minutes.




Reviews
There are no reviews yet.