0
0

Hornady Shellplate #35 Lock-N-Load AP & Projector Press

UPC: 090255926354

$57.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've got a Hornady Lock-N-Load AP progressive or an older Projector press and you want to load the Winchester Short Magnum and Super Short Magnum family, the #35 shellplate is the piece that makes it happen. Like all Hornady shellplates, the number corresponds to the matching shellholder, so if you've reloaded single-stage with a #35 holder, you already know this one covers your cases. It's milled from heat-treated steel, which is what you want in a part that spins through thousands of rounds and takes the stress of a full progressive cycle.

What the #35 Shellplate Feeds

This plate is cut for a specific group of belted and short magnum cases. It handles 223 WSSM, 243 WSSM, 25 WSSM, 270 WSM, 7mm WSM, 300 WSM, and the 7×61 Sharpe & Hart. Since the plate indexes off case head dimensions rather than the full cartridge, any round sharing a head size with those listed will sit in the same stations. That's the nice part about Hornady's system, one plate often pulls double duty across more than one caliber.

Smooth Feeding on the Lock-N-Load AP

Each shellholder mouth has a subtle radius machined into it, which guides cases in and out cleanly as the plate indexes. Paired with the retainer spring that keeps cases seated while you insert them, it cuts down on the fumbling and dropped brass that can slow down a progressive run. It's designed to work with the EZ-Ject system as well as the wire ejector setups on earlier presses.

Fitment for Your Press

The #35 fits current Lock-N-Load AP presses in both EZ-Ject and wire ejector configurations, and it drops into the older Pro-Jector press too. Swapping plates is quick, so if you're running multiple calibers on one press, keeping a few dedicated plates on the bench means you can change setups in a couple of minutes and get back to loading.

Key Specifications

  • Brand: Hornady
  • Shellplate Number: #35
  • Manufacturer Part Number: 392635
  • UPC: 090255926354
  • Material: Heat-treated steel
  • Compatible Presses: Lock-N-Load AP (EZ-Ject and wire ejector) and Pro-Jector
  • Calibers Covered: 223 WSSM, 243 WSSM, 25 WSSM, 270 WSM, 7mm WSM, 300 WSM, 7×61 Sharpe & Hart
  • Type: Progressive press shellplate
  • Shipping Weight: 0.55 lbs

What’s Included

  • One (1) Hornady #35 shellplate

Frequently Asked Questions

Which presses does the Hornady #35 shellplate fit?

It fits the Hornady Lock-N-Load AP progressive press in both EZ-Ject and older wire ejector versions, and it also works with the older Pro-Jector press. The plate is made to run with the EZ-Ject system. If you're on one of those presses, it drops right in.

What calibers does the Shellplate #35 work with?

The #35 covers 223 WSSM, 243 WSSM, 25 WSSM, 270 WSM, 7mm WSM, 300 WSM, and 7×61 Sharpe & Hart. Because the plate seats cases by their head dimension, it will also hold any cartridge that shares a case head with those rounds. One plate often handles several calibers for you.

How do the Hornady shellplate numbers match up with shellholders?

Hornady keeps it simple, the shellplate number matches the shellholder number for the same cartridges. So if you load a round with a #35 shellholder on a single-stage press, the #35 shellplate is the one you need on your progressive. It takes the guesswork out of ordering the right plate.

What is the shellplate made of and will it hold up?

The #35 is milled from heat-treated steel, which gives it the durability to handle the stress of full progressive cycles. The machined radius on each shellholder mouth also helps cases feed in and out smoothly. It's built to give years of reliable service on a busy bench.

Additional information

UPC

090255926354

Manufacturer

Manufacturer Part Number

392635

Shipping Weight

0.55

Reviews

There are no reviews yet.

Be the first to review “Hornady Shellplate #35 Lock-N-Load AP & Projector Press”