Description
If you run a Hornady progressive and load big-bore handgun rounds, the Lock-N-Load Shell Plate #32 is the piece that lets your press grip and index .45 Colt and .454 Casull brass correctly. It carries the rims through every station, so your sizing, priming, charging, and seating all line up the way they should. One plate, two popular heavy-hitting calibers, no extra fuss when you want to switch between them.
What the #32 Shell Plate Handles
This plate is cut specifically for the .45 (Long) Colt and .454 Casull case heads. Because Hornady builds each shell plate around a shared rim dimension, it will also hold other cartridges with the same case head size, which is handy if you load a range of similar rounds. It's made from steel and finished in a matte silver tone that holds up to years of regular use on the bench.
Fitment Across the Lock-N-Load Family
The #32 is designed to work with the Lock-N-Load AP, including both the EZ-Ject and older wire ejector models, as well as the earlier Pro-Jector press. Each shell holder mouth gets a subtle radius so cases drop in and feed without hanging up, and the retainer spring is built to stay put while you're loading brass into the plate. That smooth, predictable feel is what keeps a progressive session moving instead of fighting you.
Swapping shell plates is one of the quickest ways to change what your press can do. Keep a few sizes on hand and you can jump from pistol to rifle brass in minutes, which makes the #32 a solid addition for anyone who already shoots or loads the heavy .45 Colt and .454 Casull cartridges.
Key Specifications
- Size: #32
- Calibers: .45 (Long) Colt, .454 Casull
- Caliber/Gauge: Multi-Caliber
- Material: Steel
- Finish: Matte Silver
- Compatible Presses: Lock-N-Load AP (EZ-Ject and wire ejector), Pro-Jector
- Quantity: 1 Shell Plate
- Manufacturer: Hornady
- Manufacturer Part Number: 392632
- UPC: 090255926323
What’s Included
- One (1) Hornady Lock-N-Load Shell Plate #32
Frequently Asked Questions
What calibers does the Hornady Shell Plate #32 fit?
The #32 plate is designed for the .45 (Long) Colt and .454 Casull. Since Hornady builds its shell plates around case head dimensions, it will also hold other cartridges that share the same rim size.
Will the #32 shell plate work with my Lock-N-Load AP press?
Yes. It's designed to fit the Lock-N-Load AP in both EZ-Ject and the older wire ejector configurations, as well as the earlier Pro-Jector press. If you're running any of those, this plate drops right in.
Do I need anything else to swap to this shell plate?
The plate installs on the press shell plate carrier where your current plate sits. Depending on your setup and the caliber you're moving to, you may also want the matching die set and the correct priming components, but the plate itself is the key part for holding the brass.
Is the Hornady Shell Plate #32 made of steel?
Yes, it's machined from steel with a matte silver finish. The shell holder mouths have a subtle radius to help cases feed smoothly, and the retainer spring is built to stay in place while you load brass.




Reviews
There are no reviews yet.