Description
If you load 8mm rifle rounds and need to take a few apart, the Hornady Cam-Lock Bullet Puller Collet #8 is the piece that gets the job done. This is the diameter-specific collet sized for .321" and .323" bullets, and it's the gripping part of the Cam-Lock system. The puller itself clamps onto the bullet, you pull down on the press handle, and the bullet comes free. The collet is what does the actual holding, so matching it to your bullet diameter is what makes the whole setup work right.
What the #8 Collet Handles
This one is built around the 8mm family of projectiles, covering the common .321" and .323" diameters you'll run into with cartridges like 8mm Mauser and similar. It's a single collet, machined to fit that bullet range snugly. Reloaders consistently note that it grips well and lets go without leaving marks on the bullet, which matters when you're salvaging good components instead of trashing them.
Pairing the Collet With Your Cam-Lock Puller
The collet is meant to run inside the Hornady Cam-Lock Bullet Puller, which threads into any standard reloading press. If you already own the puller, you just swap in the correct collet for whatever bullet diameter you're working with. Keep a few different sizes on hand and you can break down just about anything you load. Worth noting straight from Hornady: these collets are intended for rifle cartridges, so plan accordingly when picking the right size for your bench.
Why Reloaders Keep One Nearby
Pulling bullets is just part of the game. Maybe you doubled a charge, maybe you want to rework a batch, or you picked up some surplus ammo you'd rather not shoot as-is. Having the right collet means you can take rounds apart safely and reuse the bullets, powder, and brass. It's a small, inexpensive part that saves you from wasting good components, and the Cam-Lock design makes the whole process fast once you get the rhythm down.
Key Specifications
- Manufacturer: Hornady
- Collet Size: #8
- Bullet Diameter: .321" / .323"
- Caliber: 8mm (.323)
- Intended Use: Rifle cartridges
- Compatibility: Hornady Cam-Lock Bullet Puller
- Quantity: 1 collet
- Manufacturer Part Number: 392161
- UPC: 090255921618
What’s Included
- One Hornady Cam-Lock Bullet Puller Collet #8 (.321"/.323")
Frequently Asked Questions
What bullets does the Cam-Lock Bullet Collet #8 fit?
The #8 collet is sized for .321" and .323" diameter bullets, which covers the 8mm family including cartridges like 8mm Mauser. It grips that diameter range and releases without marring the bullet. Match the collet to your bullet diameter for the best hold.
Do I need the Cam-Lock Bullet Puller to use this collet?
Yes. The collet is only the gripping component and has to be installed inside the Hornady Cam-Lock Bullet Puller to work. The puller threads into a standard reloading press, and you swap collets depending on which bullet diameter you're pulling.
Can I use the #8 collet on pistol bullets?
Hornady intends these Cam-Lock collets for rifle cartridges. Stick with rifle rounds in the .321"/.323" range for this particular collet to get the proper grip and clean results.
Will the collet damage my bullets when I pull them?
No, the design clamps and releases without leaving marks, which is a big reason reloaders like it for salvaging good components. You can reuse the bullet, powder, and brass after pulling. Just use the correct size collet for the diameter you're working with.




Reviews
There are no reviews yet.